OOYA MODEL RE 1225H RADIAL ARM DRILL – SOLD

November 9, 2011 on 1:23 pm | In Drills, Single, Turret, Radial | No Comments

SERIAL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .N74L3269
SPINDLE TAPER. . . . . . . . . . . . . . . . . . . . . . .#5 MT
COLUMN DIAMETER. . . . . . . . . . . . . . . . . .12-1/2″
SPINDLE TRAVEL. . . . . . . . . . . . . . . . . . . . .12″
DRILLING CAPACITY – STEEL . . . . . . . .2″
- CAST IRON. . . .2-1/4″
DISTANCE SPINDLE TO COLUMN. . . . .12″ TO 49.4″
VERTICAL TRAVEL OF ARM. . . . . . . . . .25.6″
DISTANCE SPINDLE TO BASE. . . . . . . . .13″ MINIMUM/52″ MAXIMUM
SPINDLE SPEEDS (12) . . . . . . . . . . . . . . . . .38 TO 1,985 RPM
AREA OF BASE . . . . . . . . . . . . . . . . . . . . . . . .52″ X 30″
MAIN SPINDLE MOTOR. . . . . . . . . . . . . . .5 HP
ELECTRICS . . . . . . . . . . . . . . . . . . . . . . . . . . .575/60/3 VOLT
DIMENSIONS. . . . . . . . . . . . . . . . . . . . . . . . . .96″ F-B X 48″ W X 86″ H
APPROX. WEIGHT . . . . . . . . . . . . . . . . . . . . .6,550 LBS
C/W:
- BOX TABLE – 17-3/4″ X 25-1/2″ X 15-3/4″;
- POWER ELEVATION;
- POWER CLAMPING TO COLUMN;
- POWER CLAMPING TO ARM;
- COOLANT PUMP;

BRONX 8 FT X 55 TON CNC/VDU UPSTROKING HYDRAULIC PRESS BRAKE

August 10, 2011 on 7:55 am | In Press Brake, Brake Press, Hydraulic, Mechanical, Pneumatic, CNC | No Comments

MODEL. . . . . . . . . . . . . . . . . . . . . . . . . . .50-25-UH CNC/VDU
SERIAL. . . . . . . . . . . . . . . . . . . . . . . . . . .7483
TONNAGE. . . . . . . . . . . . . . . . . . . . . . . .55 TONS
LENGTH OF BED & RAM. . . . . . . . . .98.5″
DIST. BETWEEN HOUSINGS. . . . . .80.7″
MAXIMUM OPEN HEIGHT . . . . . . .12.2″
RAM STROKE. . . . . . . . . . . . . . . . . . . . .3.94″
OPEN HEIGHT WITH STOPS. . . . . .11″
THROAT DEPTH . . . . . . . . . . . . . . . . .15.75″
APPROACH SPEED. . . . . . . . . . . . . . . .85 IPM
PRESSING SPEED. . . . . . . . . . . . . . . . .25 IPM
RETURN SPEED . . . . . . . . . . . . . . . . . .107 IPM
WIDTH OF BED. . . . . . . . . . . . . . . . . . .3.5″|
ELECTRICS. . . . . . . . . . . . . . . . . . . . . . .575/60/3 VOLT
MOTOR. . . . . . . . . . . . . . . . . . . . . . . . . . .10 HP
APPROX. DIMENSIONS . . . . . . . . . . .126″ L X 65″ D X 78″ H
APPROX. WEIGHT. . . . . . . . . . . . . . . .7,850 LBS
C/W:
- BRONX VDU CNC DISPLAY CONTROL;
- 2 AXIS CNC – X & Y;
- TYPE 4 TRIAD SAFETY LIGHTS WITH SAFETY PANEL, GATES, FENCES;
- ELECTRIC FOOT PEDAL;

NEW CONE MODEL 900 – 34″ X 25 TON SERVO-DRIVE CNC PRESS BRAKE

August 4, 2011 on 12:56 pm | In Press Brake, Brake Press, Hydraulic, Mechanical, Pneumatic, CNC | No Comments

CAPACITY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25 TONS
BENDING LENGTH . . . . . . . . . . . . . . . . . . . . . . . . .34.2″
DISTANCE BETWEEN HOUSINGS. . . . . . . . . . .31.8″
STROKE LENGTH. . . . . . . . . . . . . . . . . . . . . . . . . . .6.1″
MAXIMUM OPEN HEIGHT. . . . . . . . . . . . . . . . . .16.1″
CLOSED HEIGHT . . . . . . . . . . . . . . . . . . . . . . . . . . .10″
THROAT DEPTH. . . . . . . . . . . . . . . . . . . . . . . . . . . .7.9″
RAM APPROACH SPEED. . . . . . . . . . . . . . . . . . . . .236 IPM
RAM PRESSING SPEED . . . . . . . . . . . . . . . . . . . . . .24 IPM
RAM REPEATABILITY IN PRESSING SPEED.+/-0.0002″
RAM RETURN SPEED. . . . . . . . . . . . . . . . . . . . . . . .236 IPM
BACK GAUGE (X) TRAVEL. . . . . . . . . . . . . . . . . . .17.1″
BACK GAUGE (X) SPEED. . . . . . . . . . . . . . . . . . . . .1,063 IPM
BACK GAUGE (X) ACCURACY. . . . . . . . . . . . . . . .+/-0.002″
BACK GAUGE (R) HEIGHT MOVEMENT . . . . .5.32″
BACK GAUGE (R) HEIGHT SPEED . . . . . . . . . . .567 IPM
BED TOP WIDTH. . . . . . . . . . . . . . . . . . . . . . . . . . . .2.75″
BED WORKING HEIGHT. . . . . . . . . . . . . . . . . . . . .32.5″
MOTOR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7.5 HP
ELECTRICS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .230/460/575/60/3 VOLT
FLOOR SPACE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52″ X 41″ x 84″ H
APPROX. WEIGHT . . . . . . . . . . . . . . . . . . . . . . . . . . .3,967 LBS
C/W:
- OMRON CNC CONTROL;
- AMADA TOOLO HOLDERS & TOOLS;
- COLOUR TOUCH SCREEN LCD CONTROL;
- TOOL STORAGE IN CNC PROGRAM;
- MATERIAL LIBRARY IN CNC PROGRAM;
- AUTOMATIC TONNAGE CALCULATIONS WITH MANUAL OVERRIDE;
- MEMORY STORAGE FOR 250 X 8 BEND PROGRAMS;
- PROGRAMMABLE RAM APPROACH SPEED, PRESSING SPEED,
RETURN SPEED, RAM DWELL TIME, STROKE LENGTH, BACK
GAUGE RETRACT, BUMP FORM, INCH/METRIC, PARTS COUNTER,
10 NUMBERED ALPHA-NUMERIC DIE REFERENCE;
- OPTIONAL SOFTWARE FOR UPLOADING OR DOWNLOADING PROGRAMS;
- LASER GUARDS ALLOW OPERATOR TO WORK CLOSE TO DIES FOR BOX BENDING;
- SIDE SAFETY FENCES, REAR SAFETY GATE, CLASS 4 SAFETY SYSTEM, SAFETY RELAY IN PANEL;
- ARM SUPPORTS ON BOTH SIDES OF MACHINE TO REDUCE WORK STRAIN;
- HYDRO APPROVED IN CANADA;
- READY FOR PSR APPROVAL IN CANADA;

13-3/4″ DIAMETER HORIZ/VERT. ROTARY TABLE

August 3, 2011 on 12:25 pm | In Rotary Tables | No Comments

TABLE DIAMETER. . . . . . . . . . . . . . . . . . . . . . . . . 13-3/4″
TABLE HEIGHT. . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1/4″
HOLE IN CENTRE . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3/16″
VERTICAL BASE DIMENSIONS. . . . . . . . . . . . .13-3/4″ X 5″
HORIZONTAL BASE DIMENSIONS. . . . . . . . . .18″ X 15″
APPROXIMATE WEIGHT . . . . . . . . . . . . . . . . . . .175 LBS
C/W:
- HORIZONTAL OR VERTICAL MOUNTING;
- 6 CLAMPING T-SLOTS IN TABLE:
4 – 5″ LONG;
2 – 4″ LONG;
- TWO LOCKING CLAMPS FOR TABLE;

LOCKFORMER MODEL 16 C/W:PITTSBURGH ROLLS & 3 IN 1 ROLLS – SOLD

July 29, 2011 on 9:01 am | In Pittsburgh Lockformer | No Comments

MODEL. . . . . . . . . . . . . . . . . . . . . . . . . . . 16
SERIAL. . . . . . . . . . . . . . . . . . . . . . . . . . . 12989
CAPACITY . . . . . . . . . . . . . . . . . . . . . . . 16 – 20 GAUGE MILD STEEL
DEPTH OF POCKET. . . . . . . . . . . . . . . 1/2″
WIDTH OF HAMMER . . . . . . . . . . . . . 3/8″ ADJUSTABLE
HEIGHT FLOOR TO TABLE TOP. . 36″
FORMING STATIONS. . . . . . . . . . . . . 7
SPEED. . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 – 45 FPM
MAIN MOTOR. . . . . . . . . . . . . . . . . . . . 3 HP
ELECTRICS . . . . . . . . . . . . . . . . . . . . . . 575/60/3 VOLT
WEIGHT . . . . . . . . . . . . . . . . . . . . . . . . . 625 LBS
DIMENSIONS. . . . . . . . . . . . . . . . . . . . . 58″ L X 24″ W X 41″ H
C/W:
- PITTSBURGH ROLLS;
- 3 IN 1 ROLLS – RIGHT ANGLE FLANGE;
– STANDING SEAM – 5/8″;
– T CONNECTION – 5/8″;

- ON/OFF SWITCH;
- FLOOR MODEL;
- ON WHEELS;

BUFFALO #18 FLOOR MODEL #3MT DRILL PRESS – SOLD

July 29, 2011 on 8:33 am | In Drills, Single, Turret, Radial | No Comments

MODEL . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
SPINDLE TAPER . . . . . . . . . . . . . . . . . . .# 3
SPINDLE TRAVEL . . . . . . . . . . . . . . . . .4-1/2″
DRILLING CAPACITY – STEEL. . . . .3/4″
– CAST IRON. . .1″
THROAT DEPTH. . . . . . . . . . . . . . . . . . .9″
MAX. SPINDLE TO BASE . . . . . . . . . . .46-1/2″
MAX. SPINDLE TO TABLE . . . . . . . . .38-3/4″
SPINDLE SPEEDS (5). . . . . . . . . . . . . . .460 – 3,000 RPM
MAIN MOTOR . . . . . . . . . . . . . . . . . . . . .1 HP
ELECTRICS. . . . . . . . . . . . . . . . . . . . . . . .110/60/1 VOLT
DIMENSIONS . . . . . . . . . . . . . . . . . . . . . .32″ F-B X 16″ W X 70″ H
APPROX. WEIGHT . . . . . . . . . . . . . . . . .450 LBS
C/W:
- 14″ X 14″ TABLE;
- ON/OFF SWITCH;
- BELT GUARD;
- TABLE ADJUSTMENT – 30″ UP/DOWN;
- 1/8″ – 5/8″ METABO-FUTURO QUICK LOCK CHUCK;

BUFFALO #15 BENCH MODEL 1/2″ DRILL PRESS

July 29, 2011 on 7:12 am | In Drills, Single, Turret, Radial | No Comments

MODEL. . . . . . . . . . . . . . . . . . . . . . . . . . . 15
SPINDLE CAPACITY . . . . . . . . . . . . . 1/2″ JACOBS CHUCK
SPINDLE TRAVEL. . . . . . . . . . . . . . . . 4-1/2″
DRILLING CAPACITY – STEEL . . . 1/2″
- CAST IRON. . 5/8″
THROAT DEPTH . . . . . . . . . . . . . . . . . 7-1/2″
MAX. SPINDLE TO TABLE. . . . . . . . 10-1/2″
MAX. SPINDLE TO BASE. . . . . . . . . . 16″
SPINDLE SPEEDS (5). . . . . . . . . . . . . . 460 – 6,300 RPM
MAIN MOTOR . . . . . . . . . . . . . . . . . . . . 1/2 HP
ELECTRICS. . . . . . . . . . . . . . . . . . . . . . . 110/60/1 VOLT
DIMENSIONS . . . . . . . . . . . . . . . . . . . . 26″ F-B X 13″ W X 36″ H
APPROX. WEIGHT . . . . . . . . . . . . . . . 180 LBS
C/W:
- TABLE – 11″ X 11″;
- ON/OFF SWITCH;
- BELT GUARD;

ROTEX 8 TON 15-BK TURRET PUNCH PRESS

July 21, 2011 on 12:47 pm | In Punch, Punch, Turret, Manual, CNC, Turret Punch, Manual, CNC | No Comments

MODEL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15-BK
SERIAL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13509
TONNAGE . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 TON
THROAT DEPTH. . . . . . . . . . . . . . . . . . . . . .24″
PUNCHING CAPACITY. . . . . . . . . . . . . . . .1-7/8″ DIA. IN 14 GAUGE (MS)
                                                       . . . . . . . . . . . . . . . .1″ DIA. IN 12 GAUGE (MS)
                                                       . . . . . . . . . . . . . . . .3/4″ DIA. IN 10 GAUGE (MS)
PUNCHING STATIONS . . . . . . . . . . . . . . . .15
MAXIMUM PUNCH HOLE DIA. . . . . . . . .1-7/8″
TABLE HEIGHT. . . . . . . . . . . . . . . . . . . . . . .30″
FLOOR SPACE. . . . . . . . . . . . . . . . . . . . . . . . .22″ W X 44″ D X 62″ H (ON STAND)
WEIGHT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .475 LBS
C/W:
- 15 PUNCHES & DIES – 9/16″ – 1-7/8″;
9/16″, 11/16″, 13/16″, 15/16″, 1-1/16″, 1-3/16″, 1-5/16″, 1-3/8″,
1-7/16″, 1-9/16″, 1-5/8″, 1-11/16″, 1-3/4″, 1-13/16″, 1-7/8″;
- ON STAND;
- NOTE – THIS ROTEX IS DESIGNED FOR THE CUSTOMER WHO WANTS TO PUNCH
                     LARGER DIAMETER HOLES THAN THE STANDARD MACHINES.

ROTEX 8 TON 18-A 2.0 TURRET PUNCH PRESS- SOLD

July 21, 2011 on 12:37 pm | In Punch, Punch, Turret, Manual, CNC, Turret Punch, Manual, CNC | No Comments

MODEL. . . . . . . . . . . . . . . . . . . . . . . . . . . . .18-A 2.0
SERIAL. . . . . . . . . . . . . . . . . . . . . . . . . . . . .6522
TONNAGE. . . . . . . . . . . . . . . . . . . . . . . . . .8 TON
THROAT DEPTH . . . . . . . . . . . . . . . . . . .18″
PUNCHING CAPACITY . . . . . . . . . . . . .2″ DIA. IN 14 GAUGE (MS)
                                                        . . . . . . . . . . . . .1″ DIA. IN 12 GAUGE (MS)
                                                        . . . . . . . . . . . . .3/4″ DIA. IN 10 GAUGE (MS)
PUNCHING STATIONS . . . . . . . . . . . . .18
MAXIMUM PUNCH HOLE DIA. . . . . .2″
FLOOR SPACE. . . . . . . . . . . . . . . . . . . . . .22″ W X 38″ D X 62″ H (ON STAND)
WEIGHT . . . . . . . . . . . . . . . . . . . . . . . . . . .425 LBS
C/W:
- 17 PUNCHES & DIES – 5/32″ – 2″;

5/32″, 3/16″, 7/32″, 1/4″, 9/32″, 5/16″, 3/8″, 7/16″,1/2″,
5/8″, 3/4″, 7/8″, 1″, 1-1/8″, 1-1/4″, 1-1/2″, 2″;
- 1 X 2″ NIBBLING SHEAR FOR 12 GAUGE OR LIGHTER;
- ON STAND;

PROGRESS P-3-60 HORIZONTAL & VERTICAL BELT SANDER

July 18, 2011 on 8:15 am | In Sanders, Belt, Stroke, Metal, Wood | No Comments

MODEL. . . . . . . . . . . . . . . . . . . . . .P-3-60
SERIAL. . . . . . . . . . . . . . . . . . . . . .9648
BELT SIZE. . . . . . . . . . . . . . . . . . .3″ WIDE X 60″ LONG
BELT SPEED. . . . . . . . . . . . . . . . .5,400 SFPM
MOTOR. . . . . . . . . . . . . . . . . . . . . .1 HP
ELECTRICS. . . . . . . . . . . . . . . . . .115/60/1 VOLT
FLOOR SPACE. . . . . . . . . . . . . . . .23″ W X 32″ DEEP
WEIGHT . . . . . . . . . . . . . . . . . . . . .250 LBS
C/W:
- INFINITELY ADJUSTABLE HORIZONTAL OR VERTICAL POSITION;
- ON/OFF SWITCH;
- ON STAND;