» Shear, Hydraulic, Mechanical, Power, Foot, Circle

EDWARDS 50″ X 16 GAUGE POWER MINI SHEAR

July 18, 2011 on 7:01 am | In Shear, Hydraulic, Mechanical, Power, Foot, Circle | No Comments

MODEL. . . . . . . . . . . . . . . . . . . . . . . . .1.6 X 1250 MS
SERIAL. . . . . . . . . . . . . . . . . . . . . . . . .854850211
BLADE LENGTH. . . . . . . . . . . . . . . .50″
CUTTING CAPACITY. . . . . . . . . . .16 GAUGE MILD STEEL
. . . . . . . . . . .20 GAUGE STAINLESS STEEL
TABLE WIDTH . . . . . . . . . . . . . . . . .12″
CUTTING SPEED . . . . . . . . . . . . . . .60 SPM
ANGLE OF CUT . . . . . . . . . . . . . . . . .2.5 DEGREES
MOTOR. . . . . . . . . . . . . . . . . . . . . . . . .2 HP
ELECTRICS. . . . . . . . . . . . . . . . . . . . .575/60/3 VOLT
DIMENSIONS . . . . . . . . . . . . . . . . . . .66″ W X 54″ DEEP X 40″ H
WEIGHT. . . . . . . . . . . . . . . . . . . . . . . .1,000 LBS APPROX.
C/W:
- STEEL FABRICATED CONSTRUCTION;
- HIGH CHROME, HIGH CARBON BLADES – 4 EDGES;
- DIRECT DRIVE BY A REDUCTION MOTOR WITH BRAKE;
- 25″ REAR OPERATED MANUAL BACK GAUGE;
- SPRING LOADED HOLD-DOWN;
- ELECTRIC FOOT PEDAL;

URSVIKEN (PULLMAX) 13 FT X 3/8″ HYDRAULIC GUILLOTINE SHEAR

June 30, 2011 on 5:36 am | In Shear, Hydraulic, Mechanical, Power, Foot, Circle | No Comments

MODEL. . . . . . . . . . . . . . . . . . . . . . . . . .GSA 440
SERIAL. . . . . . . . . . . . . . . . . . . . . . . . . .3860
NEW. . . . . . . . . . . . . . . . . . . . . . . . . . . . .1987
CAPACITY . . . . . . . . . . . . . . . . . . . . . .13′1″ (4,000 MM)
THICKNESS . . . . . . . . . . . . . . . . . . . . .3/8″ (10 MM)
TOTAL BLADE LENGTH . . . . . . . .13′4″ (4,080 MM)
CUTTING ANGLE (ADJ). . . . . . . . .0.5 – 4.0 DEGREES
NUMBER OF HOLD DOWNS. . . . . .25
CUTTING SPEEDS. . . . . . . . . . . . . . .14 – 32 SPM
CAPACITY OIL IN TANK . . . . . . . .65 GALLONS
BACK GAUGE DEPTH. . . . . . . . . . . .31″
MOTOR. . . . . . . . . . . . . . . . . . . . . . . . . .30 HP
ELECTRICS. . . . . . . . . . . . . . . . . . . . . .575/60/3 VOLT
APPROX. WEIGHT . . . . . . . . . . . . . . .16,300 LBS
C/W:
- FRONT APRON SITS 5-7/8″ DEEP INTO FLOOR;
- CONTROL PANEL ON FRONT SWING-ARM;
- DRO FOR BACK GAUGE POSITION;
- DRO FOR ADJUSTABLE BLADE GAP;
- DRO FOR ADJUSTABLE BLADE ANGLE;
- WORKS WELL – VERY REASONABLE PRICE.

JORG 50″ X 14 GAUGE POWER ELECTRIC SHEAR

May 27, 2011 on 9:05 am | In Shear, Hydraulic, Mechanical, Power, Foot, Circle | No Comments

MODEL. . . . . . . . . . . . . . . . . . . . . . . . .4022
SERIAL. . . . . . . . . . . . . . . . . . . . . . . . .922909
BLADE LENGTH. . . . . . . . . . . . . . . .50″
CUTTING CAPACITY. . . . . . . . . . .14 GAUGE MILD STEEL
. . . . . . . . . . .18 GAUGE STAINLESS STEEL
TABLE WIDTH . . . . . . . . . . . . . . . . .12″
CUTTING SPEED . . . . . . . . . . . . . . .40 SPM
MOTOR. . . . . . . . . . . . . . . . . . . . . . . . .3 HP
ELECTRICS. . . . . . . . . . . . . . . . . . . . .575/60/3 VOLT
DIMENSIONS . . . . . . . . . . . . . . . . . . .59″ W X 25″ DEEP X 44″ H
WEIGHT. . . . . . . . . . . . . . . . . . . . . . . . 1,210 LBS
C/W:
- WELDED STEEL CONSTRUCTION;
- HIGH CHROME, HIGH CARBON BLADES:
2 EDGES TOP & BOTTOM;
- EXTRA SET OF BLADES;
- 2 X 16″ FRONT SUPPORT ARMS;
- CLAMP BAR USING THREE SPRINGS;
- SINGLE & CONTNUOUS STROKE;
- ELECTRIC FOOT PEDAL;

SAMPSON 52″ X 14 GAUGE POWER HYDRAULIC SHEAR – SOLD

November 10, 2010 on 9:27 am | In Shear, Hydraulic, Mechanical, Power, Foot, Circle | No Comments

MODEL. . . . . . . . . . . . . . . . . . . . . . . .LB414H
SERIAL. . . . . . . . . . . . . . . . . . . . . . . .069044
BLADE LENGTH. . . . . . . . . . . . . . .52″
CUTTING CAPACITY. . . . . . . . . .14 GAUGE MILD STEEL
. . . . . . . . . .18 GAUGE STAINLESS STEEL
BACK GAUGE RANGE. . . . . . . . . .25-1/2″
FRONT GAUGE RANGE . . . . . . . .38″
CUTTING SPEED . . . . . . . . . . . . . .40 SPM (AT FULL STROKE)
OIL TANK CAPACITY . . . . . . . . .10 GALLONS
MOTOR . . . . . . . . . . . . . . . . . . . . . . .3 HP
ELECTRICS . . . . . . . . . . . . . . . . . . .575/60/3 VOLT
DIMENSIONS . . . . . . . . . . . . . . . . .68″ W X 50″ DEEP X 42-1/4″ HIGH
WEIGHT. . . . . . . . . . . . . . . . . . . . . .1,836 APPROX.
C/W:
- CAST IRON BODY;
- HIGH CHROME, HIGH CARBON BLADES – 2 EDGES TOP & BOTTOM;
- REAR OPERATED MANUAL RACK & PINION BACK GAUGE;
- 1 X 4 FT FRONT SQUARING ARM & 2 X 4 FT FRONT SUPPORT ARMS;
- SPRING LOADED HOLDDOWNS;
- SINGLE & C ONTINUOUS STROKE;
- ELECTRIC FOOT PEDAL;

-

SAMPSON 52″ X 14 GAUGE POWER HYDRAULIC SHEAR

November 5, 2010 on 12:04 pm | In Shear, Hydraulic, Mechanical, Power, Foot, Circle | No Comments

MODEL. . . . . . . . . . . . . . . . . . . . . . . . . . . .LB414H
SERIAL . . . . . . . . . . . . . . . . . . . . . . . . . . .11063
BLADE LENGTH. . . . . . . . . . . . . . . . . . . .52″
CUTTING CAPACITY . . . . . . . . . . . . . . .14 GAUGE MILD STEEL
. . . . . . . . . . . . . . .18 GAUGE STAINLESS STEEL
BACK GAUGE RANGE. . . . . . . . . . . . . . .24″
FRONT GAUGE RANGE . . . . . . . . . . . . .38″
CUTTING SPEED. . . . . . . . . . . . . . . . . . .40 SPM (AT FULL STROKE)
OIL TANK CAPACITY . . . . . . . . . . . . . .10 GALLONS
MOTOR . . . . . . . . . . . . . . . . . . . . . . . . . .3 HP
ELECTRICS . . . . . . . . . . . . . . . . . . . . . . .575/60/3 VOLT
DIMENSIONS . . . . . . . . . . . . . . . . . . . . .68″ W X 48″ DEEP X 42-1/4″ H
APPROX. WEIGHT . . . . . . . . . . . . . . . . .1,836 LBS
C/W:
- CAST IRON BODY;
- HIGH CHROME, HIGH CARBON BLADES – 2 EDGES TOP & BOTTOM;
- REAR OPERATED MANUAL SLIDING TYPE BACK GAUGE;
- 2 X 4 FT FRONT SUPPORT ARMS;
- SPRING LOADED HOLDDOWNS;
- SINGLE & CONTINUOUS STROKE;
- ELECTRIC FOOT PEDAL:

KEETONA 10 FT X 10 GAUGE A/C MECHANICAL SHEAR

July 12, 2010 on 5:00 am | In Shear, Hydraulic, Mechanical, Power, Foot, Circle | No Comments

MODEL. . . . . . . . . . . . . . . . . . . . . . . . . SHEARMATIC KSMTIF
SERIAL. . . . . . . . . . . . . . . . . . . . . . . . .ASM.1208102
BLADE LENGTH. . . . . . . . . . . . . . . .122″
CUTTING CAPACITY. . . . . . . . . . .10 GAUGE MILD STEEL
. . . . . . . . . . .12 GAUGE STAINLESS STEEL
POWER BACK GAUGE. . . . . . . . . . .36″ WITH READ-OUTS
CUTTING SPEED . . . . . . . . . . . . . . .60 SPM
MOTOR. . . . . . . . . . . . . . . . . . . . . . . . .10 HP
ELECTRICS. . . . . . . . . . . . . . . . . . . . .575/60/3 VOLT
FLOOR SPACE. . . . . . . . . . . . . . . . . . .178″ W X 72″ D X 54″ H
WEIGHT. . . . . . . . . . . . . . . . . . . . . . . .11,000 LBS
C/W:
- AIR OPERATED CLUTCH & BRAKE;
- INCH & METRIC MECHANICAL READOUTS FOR BACKGAUGE;
- CAM OPERATED HOLD DOWNS;
- 1 X 8 FT SQUARING ARM WITH SCALE;
- 2 X FRONT SHEET SUPPORT ARMS;
- 1 X ELECTRIC FOOT PEDAL;
- SINGLE/CONTINUOS STROKE SWITCH;
- 1 SHOT MANUAL LUBRICATION;

JORG 16 GAUGE RING & CIRCLE CUTTING SHEAR

August 11, 2009 on 11:19 am | In Shear, Hydraulic, Mechanical, Power, Foot, Circle | Comments Off

MODEL. . . . . . . . . . . . . . . . . . . . . . . . . . . .4220
SERIAL. . . . . . . . . . . . . . . . . . . . . . . . . . . .890930
MAXIMUM DIAMETER. . . . . . . . . . . .26″
CUTTING CAPACITY. . . . . . . . . . . . . .16 GAUGE ALUMINIUM
. . . . . . . . . . . . . .19 GAUGE MILD STEEL
MOTOR . . . . . . . . . . . . . . . . . . . . . . . . . . .3/4 HP
ELECTRICS . . . . . . . . . . . . . . . . . . . . . . .575/60/3 VOLT
FLOOR SPACE . . . . . . . . . . . . . . . . . . . . .47″ L X 16″ W X 48″ H
WEIGHT . . . . . . . . . . . . . . . . . . . . . . . . . .250 LBS APPROX.
C/W:
- ON FLOOR STAND;
- ADJUSTABLE SHAFTS TO TAKE-UP POSSIBLE WEAR;
- ELECTRIC FOOT PEDAL;
- ON/OFF SWITCH;
- START BUTTON & LIGHT;
- EMERGENCY STOP BUTTON;

- MACHINE STILL NEW – WAS NEVER USED!

BROWN BOGGS 4 FT X 16 GAUGE FOOT SHEAR WITH 18″ GAP IN FRAME – SOLD

May 5, 2008 on 3:32 pm | In Shear, Hydraulic, Mechanical, Power, Foot, Circle | Comments Off

MODEL. . . . . . . . . . . . . . . . . . . . .188
BLADE LENGTH . . . . . . . . . . . . . .49″
CAPACITY – MILD STEEL. . . . . . .16 GAUGE
- STAINLESS. . . . . . . .22 GAUGE
GAP IN FRAME. . . . . . . . . . . . . . .18″
WIDTH OF FRONT BED. . . . . . . . .12″
BED HEIGHT FROM FLOOR. . . . . .31-1/2″
APPROX. WEIGHT . . . . . . . . . . . .1,850 LBS
DIMENSIONS. . . . . . . . . . . . . . . .69″ LX 57″ W X 60″ H
C/W:
- MANUAL SELF-LOCKING HOLDDOWN;
- HIGH CHROME, HIGH CARBON SINGLE EDGE BLADES;
- REAR OPERATED MANUAL BACK GAUGE;
- 2 FRONT SHEET SUPPORT ARMS;
- CAN SLIT TO THE CENTRE OF A 36″ DEEP SHEET – ANY LENGTH;

NATIONAL 52″ X 16 GAUGE METAL FOOT SHEAR – NEW

October 10, 2006 on 11:24 am | In Shear, Hydraulic, Mechanical, Power, Foot, Circle | Comments Off

MODEL . . . . . . . . . . . . . . . . . . . . N 5216
SERIAL. . . . . . . . . . . . . . . . . . . .152-906 & 153-906
BLADE LENGTH. . . . . . . . . . . . . .52″
CUTTING CAPACITY. . . . . . . . . .16 GAUGE MILD STEEL
. . . . . . . . . .20 GAUGE STAINLESS STEEL
BED HEIGHT FROM FLOOR . . . . .31-1/2″
FLOOR SPACE W/GAUGES . . . . .61″ L X 75-7/8″ W X 42-1/4″ H
FLOOR SPACE W/O GAUGES. . . .61″ L X 34-1/4″ W X 42-1/4″ H
WEIGHT. . . . . . . . . . . . . . . . . . . 980 LBS
C/W:
- CAST IRON BODY;
- 4 CUTTING EDGE HIGH CHROME, HIGH CARBON BLADES;
- REAR OPERATED MANUAL BACK GAUGE;
- 2 X FRONT TABLE SUPPORT ARMS;
- 3 YEAR PARTS ONLY WARRANTY;