» Press Brake, Brake Press, Hydraulic, Mechanical, Pneumatic, CNC http://www.stevensmachine.com/used Air Compressors, Spot Welders, Deburring Machines, Drills, Grinders, Ironworkers, Punch Presses, Press Brakes, Saws, Shears Tue, 13 Dec 2011 16:40:41 +0000 http://wordpress.org/?v=2.9.2 en hourly 1 WYSONG 12 FT X 250 TON MTH II 250-144 HYDRAULIC PRESS BRAKE http://www.stevensmachine.com/used/2011/12/13/wysong-12-ft-x-250-ton-mth-ii-250-144-hydraulic-press-brake/ http://www.stevensmachine.com/used/2011/12/13/wysong-12-ft-x-250-ton-mth-ii-250-144-hydraulic-press-brake/#comments Tue, 13 Dec 2011 16:40:41 +0000 admin http://www.stevensmachine.com/used/?p=2257 MODEL. . . . . . . . . . . . . . . . . . . . . . . . . . MTH II 250-144
SERIAL. . . . . . . . . . . . . . . . . . . . . . . . . .MT 19-121
NEW . . . . . . . . . . . . . . . . . . . . . . . . . . . .1997
CAPACITY. . . . . . . . . . . . . . . . . . . . . . . .250 TON
BED LENGTH . . . . . . . . . . . . . . . . . . . . .144″
DISTANCE BETWEEN UPRIGHTS. . . . .126″
RAM STROKE . . . . . . . . . . . . . . . . . . . . .0 – 10″
OPEN HEIGHT. . . . . . . . . . . . . . . . . . . . .19″
THROAT DEPTH . . . . . . . . . . . . . . . . . . .10″
BED TOP WIDTH . . . . . . . . . . . . . . . . . . .12″
APPROACH SPEED . . . . . . . . . . . . . . . . . .250 IPM
WORKING SPEED. . . . . . . . . . . . . . . . . . .20 IPM
RETURN SPEED . . . . . . . . . . . . . . . . . . . .200 IPM
ELECTRICS . . . . . . . . . . . . . . .  . . . . . . . .575/60/3 VOLT
MOTOR . . . . . . . . . . . . . . . . . . . . . . . . . . .20 HP
WEIGHT . . . . . . . . . . . . . . . . . . . . . . . . . .35,000 LBS
DIMENSIONS . . . . . . . . . . . . . . . . . . . . . .152″ LX 76″ F-B X 119″ H
C/W:
- AUTOMEC CNC 1000 – 2 AXIS CNC CONTROL – BACK GAUGE & RAM;
- SINGLE VEE CROWNED BOTTOM BOLSTER;
- PALM BUTTONS ON STAND & ELECTRIC FOOT PEDAL;
TRAID SAFETY LIGHTS ON FRONT & GATE IN REAR;
- $13,000.00 OF NEW TOOLING PURCHASED IN 2007;
- MACHINE UNDER POWER IN PLANT;

 

]]> http://www.stevensmachine.com/used/2011/12/13/wysong-12-ft-x-250-ton-mth-ii-250-144-hydraulic-press-brake/feed/ 0 BRONX 8 FT X 55 TON CNC/VDU UPSTROKING HYDRAULIC PRESS BRAKE http://www.stevensmachine.com/used/2011/08/10/bronx-8-ft-x-55-ton-cncvdu-upstroking-hydraulic-press-brake/ http://www.stevensmachine.com/used/2011/08/10/bronx-8-ft-x-55-ton-cncvdu-upstroking-hydraulic-press-brake/#comments Wed, 10 Aug 2011 17:25:27 +0000 admin http://www.stevensmachine.com/used/?p=2230 MODEL. . . . . . . . . . . . . . . . . . . . . . . . . . .50-25-UH CNC/VDU
SERIAL. . . . . . . . . . . . . . . . . . . . . . . . . . .7483
TONNAGE. . . . . . . . . . . . . . . . . . . . . . . .55 TONS
LENGTH OF BED & RAM. . . . . . . . . .98.5″
DIST. BETWEEN HOUSINGS. . . . . .80.7″
MAXIMUM OPEN HEIGHT . . . . . . .12.2″
RAM STROKE. . . . . . . . . . . . . . . . . . . . .3.94″
OPEN HEIGHT WITH STOPS. . . . . .11″
THROAT DEPTH . . . . . . . . . . . . . . . . .15.75″
APPROACH SPEED. . . . . . . . . . . . . . . .85 IPM
PRESSING SPEED. . . . . . . . . . . . . . . . .25 IPM
RETURN SPEED . . . . . . . . . . . . . . . . . .107 IPM
WIDTH OF BED. . . . . . . . . . . . . . . . . . .3.5″|
ELECTRICS. . . . . . . . . . . . . . . . . . . . . . .575/60/3 VOLT
MOTOR. . . . . . . . . . . . . . . . . . . . . . . . . . .10 HP
APPROX. DIMENSIONS . . . . . . . . . . .126″ L X 65″ D X 78″ H
APPROX. WEIGHT. . . . . . . . . . . . . . . .7,850 LBS
C/W:
- BRONX VDU CNC DISPLAY CONTROL;
- 2 AXIS CNC – X & Y;
- TYPE 4 TRIAD SAFETY LIGHTS WITH SAFETY PANEL, GATES, FENCES;
- ELECTRIC FOOT PEDAL;

]]> http://www.stevensmachine.com/used/2011/08/10/bronx-8-ft-x-55-ton-cncvdu-upstroking-hydraulic-press-brake/feed/ 0 NEW CONE MODEL 900 – 34″ X 25 TON SERVO-DRIVE CNC PRESS BRAKE http://www.stevensmachine.com/used/2011/08/04/new-cone-model-900-34-x-25-ton-servo-drive-cnc-press-brake/ http://www.stevensmachine.com/used/2011/08/04/new-cone-model-900-34-x-25-ton-servo-drive-cnc-press-brake/#comments Thu, 04 Aug 2011 22:26:48 +0000 admin http://www.stevensmachine.com/used/?p=2217 CAPACITY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25 TONS
BENDING LENGTH . . . . . . . . . . . . . . . . . . . . . . . . .34.2″
DISTANCE BETWEEN HOUSINGS. . . . . . . . . . .31.8″
STROKE LENGTH. . . . . . . . . . . . . . . . . . . . . . . . . . .6.1″
MAXIMUM OPEN HEIGHT. . . . . . . . . . . . . . . . . .16.1″
CLOSED HEIGHT . . . . . . . . . . . . . . . . . . . . . . . . . . .10″
THROAT DEPTH. . . . . . . . . . . . . . . . . . . . . . . . . . . .7.9″
RAM APPROACH SPEED. . . . . . . . . . . . . . . . . . . . .236 IPM
RAM PRESSING SPEED . . . . . . . . . . . . . . . . . . . . . .24 IPM
RAM REPEATABILITY IN PRESSING SPEED.+/-0.0002″
RAM RETURN SPEED. . . . . . . . . . . . . . . . . . . . . . . .236 IPM
BACK GAUGE (X) TRAVEL. . . . . . . . . . . . . . . . . . .17.1″
BACK GAUGE (X) SPEED. . . . . . . . . . . . . . . . . . . . .1,063 IPM
BACK GAUGE (X) ACCURACY. . . . . . . . . . . . . . . .+/-0.002″
BACK GAUGE (R) HEIGHT MOVEMENT . . . . .5.32″
BACK GAUGE (R) HEIGHT SPEED . . . . . . . . . . .567 IPM
BED TOP WIDTH. . . . . . . . . . . . . . . . . . . . . . . . . . . .2.75″
BED WORKING HEIGHT. . . . . . . . . . . . . . . . . . . . .32.5″
MOTOR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7.5 HP
ELECTRICS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .230/460/575/60/3 VOLT
FLOOR SPACE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52″ X 41″ x 84″ H
APPROX. WEIGHT . . . . . . . . . . . . . . . . . . . . . . . . . . .3,967 LBS
C/W:
- OMRON CNC CONTROL;
- AMADA TOOLO HOLDERS & TOOLS;
- COLOUR TOUCH SCREEN LCD CONTROL;
- TOOL STORAGE IN CNC PROGRAM;
- MATERIAL LIBRARY IN CNC PROGRAM;
- AUTOMATIC TONNAGE CALCULATIONS WITH MANUAL OVERRIDE;
- MEMORY STORAGE FOR 250 X 8 BEND PROGRAMS;
- PROGRAMMABLE RAM APPROACH SPEED, PRESSING SPEED,
  RETURN SPEED, RAM DWELL TIME, STROKE LENGTH, BACK
  GAUGE RETRACT, BUMP FORM, INCH/METRIC, PARTS COUNTER,
  10 NUMBERED ALPHA-NUMERIC DIE REFERENCE;
- OPTIONAL SOFTWARE FOR UPLOADING OR DOWNLOADING PROGRAMS;
- LASER GUARDS ALLOW OPERATOR TO WORK CLOSE TO DIES FOR BOX BENDING;
- SIDE SAFETY FENCES, REAR SAFETY GATE, CLASS 4 SAFETY SYSTEM, SAFETY RELAY IN PANEL;
- ARM SUPPORTS ON BOTH SIDES OF MACHINE TO REDUCE WORK STRAIN;
- HYDRO APPROVED IN CANADA;
- READY FOR PSR APPROVAL IN CANADA;

 

 

]]> http://www.stevensmachine.com/used/2011/08/04/new-cone-model-900-34-x-25-ton-servo-drive-cnc-press-brake/feed/ 0 BANTAM 60 INCH X 12 TON B 512 PNEUMATIC PRESS BRAKE – SOLD http://www.stevensmachine.com/used/2010/11/10/bantam-60-inch-x-12-ton-b-512-pneumatic-press-brake/ http://www.stevensmachine.com/used/2010/11/10/bantam-60-inch-x-12-ton-b-512-pneumatic-press-brake/#comments Wed, 10 Nov 2010 21:21:02 +0000 admin http://www.stevensmachine.com/used/?p=1883 MODEL . . . . . . . . . . . . . . . . . . . . . . . . . . .B 512
SERIAL . . . . . . . . . . . . . . . . . . . . . . . . . . .2165
TONNAGE . . . . . . . . . . . . . . . . . . . . . . . .12 TONS
BENDING CAPACITY . . . . . . . . . . . . .60″ X 20 GAUGE
                                                    . . . . . . . . . . . . .48″ X 18 GAUGE
                                                    . . . . . . . . . . . . .39″ X 16 GAUGE
BED LENGTH. . . . . . . . . . . . . . . . . . . . .60″
DIST. BETWEEN HOUSINGS . . . . . .58″
OPEN RAM HEIGHT . . . . . . . . . . . . . .13-7/8″
SHUT HEIGHT . . . . . . . . . . . . . . . . . . .7″
ADJ. STROKE LENGTH . . . . . . . . . . .0 – 1-7/8″
THROAT DEPTH . . . . . . . . . . . . . . . . .5-3/4″
BED ADJUSTMENT – UP/DOWN. . .2″
SPEED . . . . . . . . . . . . . . . . . . . . . . . . . . . .30 SPM (FULL STROKE)}
APPROX. DIMENSIONS . . . . . . . . . . .74″ W X 30″ DEEP X 59″ HIGH
APPROX. WEIGHT. . . . . . . . . . . . . . . .1,650 LBS
C/W:
- BOTTOM DIE BOLSTER – 1-1/2″ SQUARE;
- TOP KNIFE DIE;
- 4 WAY BOTTOM DIE – 1-3/8″ SQUARE;
- PNEUMATIC FOOT PEDAL;
- REQUIRES 90 PSI;
- FLOOR STAND;


]]> http://www.stevensmachine.com/used/2010/11/10/bantam-60-inch-x-12-ton-b-512-pneumatic-press-brake/feed/ 0 PROMECAM 6 FT X 40 TON HYDRAULIC PRESS BRAKE http://www.stevensmachine.com/used/2010/11/08/promecam-35-ton-hydraulic-press-brake/ http://www.stevensmachine.com/used/2010/11/08/promecam-35-ton-hydraulic-press-brake/#comments Mon, 08 Nov 2010 22:18:35 +0000 admin http://www.stevensmachine.com/used/?p=1836 MODEL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35-20
SERIAL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .203520147
TONNAGE. . . . . . . . . . . . . . . . . . . . . . . . . . . .40 TONS
BED LENGTH . . . . . . . . . . . . . . . . . . . . . . . .6′ 7-1/2″
DISTANCE BETWEEN UPRIGHTS. . . .5′6″
MAXIMUM OPEN HEIGHT. . . . . . . . . . .12″
CLOSED HEIGHT . . . . . . . . . . . . . . . . . . . .8″
STROKE LENGTH. . . . . . . . . . . . . . . . . . . .0 – 4″
APPROACH SPEED. . . . . . . . . . . . . . . . . . .126 IPM
PRESSING SPEED . . . . . . . . . . . . . . . . . . . .49 IPM
RETURN SPEED. . . . . . . . . . . . . . . . . . . . . .187 IPM
WIDTH OF BED . . . . . . . . . . . . . . . . . . . . . .2.75″
HYDRAULIC TANK CAPACITY . . . . . .40 GALLONS
ELECTRICS. . . . . . . . . . . . . . . . . . . . . . . . . .550/60/3 VOLT
DIMENSIONS . . . . . . . . . . . . . . . . . . . . . . . .81″ L X 41″ D X 76″ H
WEIGHT. . . . . . . . . . . . . . . . . . . . . . . . . . . . .5,600 LBS
C/W:
- SOME TOOLS;
- MECHANICAL FOOT BAR;
- RUN/INCH SWITCH;
- ADJUSTABLE OPEN HEIGHT;
- REAR GAUGE;
- WELL MAINTAINED – IN VERY GOOD CONDITION;

 

 

]]> http://www.stevensmachine.com/used/2010/11/08/promecam-35-ton-hydraulic-press-brake/feed/ 0 DIACRO 12 TON PRESS BRAKE – MODEL 18-48 http://www.stevensmachine.com/used/2009/09/10/diacro-12-ton-hydra-mechanical-press-brake-model-18-48/ http://www.stevensmachine.com/used/2009/09/10/diacro-12-ton-hydra-mechanical-press-brake-model-18-48/#comments Thu, 10 Sep 2009 22:32:53 +0000 admin http://www.stevensmachine.com/used/?p=1220 MODEL. . . . . . . . . . . . . . . . . . . . . . . . . . .18-48
SERIAL. . . . . . . . . . . . . . . . . . . . . . . . . . .620047432
TONNAGE . . . . . . . . . . . . . . . . . . . . . . . .12 TONS
BENDING CAPACITY. . . . . . . . . . . . .18 GAUGE MILD STEEL
BED LENGTH. . . . . . . . . . . . . . . . . . . . .48″
DISTANCE BETWEEN UPRIGHTS.25″
SHUT HEIGHT. . . . . . . . . . . . . . . . . . . .7-1/2″
STROKE LENGTH. . . . . . . . . . . . . . . . .1/2″ – 1-1/2″
THROAT DEPTH. . . . . . . . . . . . . . . . . .6-1/2″
BED ADJUSTMENT- UP/DOWN. . . .2″
SPEED. . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 – 52 SPM
ELECTRICS. . . . . . . . . . . . . . . . . . . . . . .230/3/60 VOLT
MOTOR. . . . . . . . . . . . . . . . . . . . . . . . . . .3 HP
APPROX. DIMENSIONS . . . . . . . . . . .48″ W X 28″ D X 65″ H
APPROX. WEIGHT. . . . . . . . . . . . . . . .1,820 LBS
C/W:
- BOTTOM DIE HOLDER – 1-1/2″ H X 2-1/4″ W X 48″ LONG;
   C/W: 1/2″ TANG & GRUB SCREWS TO HOLD SINGLE VEE DIES;
- MECHANICAL BAR TYPE FOOT PEDAL;
- 16″ REAR OPERATED MANUAL BACK GAUGE;
- BED HEIGHT ADJUSTABLE WITH HAND CRANK;
- START/STOP BUTTONS & ELECT. DISCONNECT SWITCH;

]]> http://www.stevensmachine.com/used/2009/09/10/diacro-12-ton-hydra-mechanical-press-brake-model-18-48/feed/ 0 ALLSTEEL 70 TON x 10 FT HYDRAULIC PRESS BRAKE http://www.stevensmachine.com/used/2009/07/31/70-ton-x-10-ft-allsteel-hydraulic-press-brake/ http://www.stevensmachine.com/used/2009/07/31/70-ton-x-10-ft-allsteel-hydraulic-press-brake/#comments Sat, 01 Aug 2009 00:22:02 +0000 admin http://www.stevensmachine.com/used/?p=1179 MODEL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70-10
SERIAL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .154
TONNAGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70 TONS
BED LENGTH. . . . . . . . . . . . . . . . . . . . . . . . . .120″
DISTANCE BETWEEN UPRIGHTS. . . . . .102″
MAXIMUM OPEN HEIGHT. . . . . . . . . . . . .17″
CLOSED HEIGHT . . . . . . . . . . . . . . . . . . . . . .9″
STROKE LENGTH. . . . . . . . . . . . . . . . . . . . . .0 – 8″
THROAT DEPTH. . . . . . . . . . . . . . . . . . . . . . .8″
MAXIMUM BED TILT. . . . . . . . . . . . . . . . . .0.500″
APPROACH SPEED . . . . . . . . . . . . . . . . . . . . .120 IPM
PRESSING SPEED . . . . . . . . . . . . . . . . . . . . . .15 – 60 IPM
RETURN SPEED. . . . . . . . . . . . . . . . . . . . . . . .120 IPM
WIDTH OF BED. . . . . . . . . . . . . . . . . . . . . . . .2.75″
HYDRAULIC TANK CAPACITY. . . . . . . . .40 GALLONS
ELECTRICS . . . . . . . . . . . . . . . . . . . . . . . . . . . .550/60/3 VOLT
MOTOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 HP
APPROX. DIMENSIONS. . . . . . . . . . . . . . . . .120″ L X 50″ D X 94″ H
APPROX. WEIGHT . . . . . . . . . . . . . . . . . . . . .13,600 LBS
C/W:
- 5″ HIGH BOTTOM DIE BOLSTER;
- ELECTRIC FOOT PEDAL;
- RUN/INCH SWITCH;
- ADJUSTABLE PRESSING SPEED;

 

 

]]> http://www.stevensmachine.com/used/2009/07/31/70-ton-x-10-ft-allsteel-hydraulic-press-brake/feed/ 0