WYSONG 12 FT X 250 TON MTH II 250-144 HYDRAULIC PRESS BRAKE
December 13, 2011 on 7:10 am | In Press Brake, Brake Press, Hydraulic, Mechanical, Pneumatic, CNC | No CommentsMODEL. . . . . . . . . . . . . . . . . . . . . . . . . . MTH II 250-144
SERIAL. . . . . . . . . . . . . . . . . . . . . . . . . .MT 19-121
NEW . . . . . . . . . . . . . . . . . . . . . . . . . . . .1997
CAPACITY. . . . . . . . . . . . . . . . . . . . . . . .250 TON
BED LENGTH . . . . . . . . . . . . . . . . . . . . .144″
DISTANCE BETWEEN UPRIGHTS. . . . .126″
RAM STROKE . . . . . . . . . . . . . . . . . . . . .0 – 10″
OPEN HEIGHT. . . . . . . . . . . . . . . . . . . . .19″
THROAT DEPTH . . . . . . . . . . . . . . . . . . .10″
BED TOP WIDTH . . . . . . . . . . . . . . . . . . .12″
APPROACH SPEED . . . . . . . . . . . . . . . . . .250 IPM
WORKING SPEED. . . . . . . . . . . . . . . . . . .20 IPM
RETURN SPEED . . . . . . . . . . . . . . . . . . . .200 IPM
ELECTRICS . . . . . . . . . . . . . . . . . . . . . . .575/60/3 VOLT
MOTOR . . . . . . . . . . . . . . . . . . . . . . . . . . .20 HP
WEIGHT . . . . . . . . . . . . . . . . . . . . . . . . . .35,000 LBS
DIMENSIONS . . . . . . . . . . . . . . . . . . . . . .152″ LX 76″ F-B X 119″ H
C/W:
- AUTOMEC CNC 1000 – 2 AXIS CNC CONTROL – BACK GAUGE & RAM;
- SINGLE VEE CROWNED BOTTOM BOLSTER;
- PALM BUTTONS ON STAND & ELECTRIC FOOT PEDAL;
TRAID SAFETY LIGHTS ON FRONT & GATE IN REAR;
- $13,000.00 OF NEW TOOLING PURCHASED IN 2007;
- MACHINE UNDER POWER IN PLANT;
BRONX 8 FT X 55 TON CNC/VDU UPSTROKING HYDRAULIC PRESS BRAKE
August 10, 2011 on 7:55 am | In Press Brake, Brake Press, Hydraulic, Mechanical, Pneumatic, CNC | No CommentsMODEL. . . . . . . . . . . . . . . . . . . . . . . . . . .50-25-UH CNC/VDU
SERIAL. . . . . . . . . . . . . . . . . . . . . . . . . . .7483
TONNAGE. . . . . . . . . . . . . . . . . . . . . . . .55 TONS
LENGTH OF BED & RAM. . . . . . . . . .98.5″
DIST. BETWEEN HOUSINGS. . . . . .80.7″
MAXIMUM OPEN HEIGHT . . . . . . .12.2″
RAM STROKE. . . . . . . . . . . . . . . . . . . . .3.94″
OPEN HEIGHT WITH STOPS. . . . . .11″
THROAT DEPTH . . . . . . . . . . . . . . . . .15.75″
APPROACH SPEED. . . . . . . . . . . . . . . .85 IPM
PRESSING SPEED. . . . . . . . . . . . . . . . .25 IPM
RETURN SPEED . . . . . . . . . . . . . . . . . .107 IPM
WIDTH OF BED. . . . . . . . . . . . . . . . . . .3.5″|
ELECTRICS. . . . . . . . . . . . . . . . . . . . . . .575/60/3 VOLT
MOTOR. . . . . . . . . . . . . . . . . . . . . . . . . . .10 HP
APPROX. DIMENSIONS . . . . . . . . . . .126″ L X 65″ D X 78″ H
APPROX. WEIGHT. . . . . . . . . . . . . . . .7,850 LBS
C/W:
- BRONX VDU CNC DISPLAY CONTROL;
- 2 AXIS CNC – X & Y;
- TYPE 4 TRIAD SAFETY LIGHTS WITH SAFETY PANEL, GATES, FENCES;
- ELECTRIC FOOT PEDAL;
NEW CONE MODEL 900 – 34″ X 25 TON SERVO-DRIVE CNC PRESS BRAKE
August 4, 2011 on 12:56 pm | In Press Brake, Brake Press, Hydraulic, Mechanical, Pneumatic, CNC | No CommentsBENDING LENGTH . . . . . . . . . . . . . . . . . . . . . . . . .34.2″
DISTANCE BETWEEN HOUSINGS. . . . . . . . . . .31.8″
STROKE LENGTH. . . . . . . . . . . . . . . . . . . . . . . . . . .6.1″
MAXIMUM OPEN HEIGHT. . . . . . . . . . . . . . . . . .16.1″
CLOSED HEIGHT . . . . . . . . . . . . . . . . . . . . . . . . . . .10″
THROAT DEPTH. . . . . . . . . . . . . . . . . . . . . . . . . . . .7.9″
RAM APPROACH SPEED. . . . . . . . . . . . . . . . . . . . .236 IPM
RAM PRESSING SPEED . . . . . . . . . . . . . . . . . . . . . .24 IPM
RAM REPEATABILITY IN PRESSING SPEED.+/-0.0002″
RAM RETURN SPEED. . . . . . . . . . . . . . . . . . . . . . . .236 IPM
BACK GAUGE (X) TRAVEL. . . . . . . . . . . . . . . . . . .17.1″
BACK GAUGE (X) SPEED. . . . . . . . . . . . . . . . . . . . .1,063 IPM
BACK GAUGE (X) ACCURACY. . . . . . . . . . . . . . . .+/-0.002″
BACK GAUGE (R) HEIGHT MOVEMENT . . . . .5.32″
BACK GAUGE (R) HEIGHT SPEED . . . . . . . . . . .567 IPM
BED TOP WIDTH. . . . . . . . . . . . . . . . . . . . . . . . . . . .2.75″
BED WORKING HEIGHT. . . . . . . . . . . . . . . . . . . . .32.5″
MOTOR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7.5 HP
ELECTRICS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .230/460/575/60/3 VOLT
FLOOR SPACE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52″ X 41″ x 84″ H
APPROX. WEIGHT . . . . . . . . . . . . . . . . . . . . . . . . . . .3,967 LBS
C/W:
- OMRON CNC CONTROL;
- AMADA TOOLO HOLDERS & TOOLS;
- COLOUR TOUCH SCREEN LCD CONTROL;
- TOOL STORAGE IN CNC PROGRAM;
- MATERIAL LIBRARY IN CNC PROGRAM;
- AUTOMATIC TONNAGE CALCULATIONS WITH MANUAL OVERRIDE;
- MEMORY STORAGE FOR 250 X 8 BEND PROGRAMS;
- PROGRAMMABLE RAM APPROACH SPEED, PRESSING SPEED,
RETURN SPEED, RAM DWELL TIME, STROKE LENGTH, BACK
GAUGE RETRACT, BUMP FORM, INCH/METRIC, PARTS COUNTER,
10 NUMBERED ALPHA-NUMERIC DIE REFERENCE;
- OPTIONAL SOFTWARE FOR UPLOADING OR DOWNLOADING PROGRAMS;
- LASER GUARDS ALLOW OPERATOR TO WORK CLOSE TO DIES FOR BOX BENDING;
- SIDE SAFETY FENCES, REAR SAFETY GATE, CLASS 4 SAFETY SYSTEM, SAFETY RELAY IN PANEL;
- ARM SUPPORTS ON BOTH SIDES OF MACHINE TO REDUCE WORK STRAIN;
- HYDRO APPROVED IN CANADA;
- READY FOR PSR APPROVAL IN CANADA;
BANTAM 60 INCH X 12 TON B 512 PNEUMATIC PRESS BRAKE – SOLD
November 10, 2010 on 11:51 am | In Press Brake, Brake Press, Hydraulic, Mechanical, Pneumatic, CNC | No CommentsMODEL . . . . . . . . . . . . . . . . . . . . . . . . . . .B 512
SERIAL . . . . . . . . . . . . . . . . . . . . . . . . . . .2165
TONNAGE . . . . . . . . . . . . . . . . . . . . . . . .12 TONS
BENDING CAPACITY . . . . . . . . . . . . .60″ X 20 GAUGE
. . . . . . . . . . . . .48″ X 18 GAUGE
. . . . . . . . . . . . .39″ X 16 GAUGE
BED LENGTH. . . . . . . . . . . . . . . . . . . . .60″
DIST. BETWEEN HOUSINGS . . . . . .58″
OPEN RAM HEIGHT . . . . . . . . . . . . . .13-7/8″
SHUT HEIGHT . . . . . . . . . . . . . . . . . . .7″
ADJ. STROKE LENGTH . . . . . . . . . . .0 – 1-7/8″
THROAT DEPTH . . . . . . . . . . . . . . . . .5-3/4″
BED ADJUSTMENT – UP/DOWN. . .2″
SPEED . . . . . . . . . . . . . . . . . . . . . . . . . . . .30 SPM (FULL STROKE)}
APPROX. DIMENSIONS . . . . . . . . . . .74″ W X 30″ DEEP X 59″ HIGH
APPROX. WEIGHT. . . . . . . . . . . . . . . .1,650 LBS
C/W:
- BOTTOM DIE BOLSTER – 1-1/2″ SQUARE;
- TOP KNIFE DIE;
- 4 WAY BOTTOM DIE – 1-3/8″ SQUARE;
- PNEUMATIC FOOT PEDAL;
- REQUIRES 90 PSI;
- FLOOR STAND;
PROMECAM 6 FT X 40 TON HYDRAULIC PRESS BRAKE
November 8, 2010 on 12:48 pm | In Press Brake, Brake Press, Hydraulic, Mechanical, Pneumatic, CNC | No CommentsSERIAL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .203520147
TONNAGE. . . . . . . . . . . . . . . . . . . . . . . . . . . .40 TONS
BED LENGTH . . . . . . . . . . . . . . . . . . . . . . . .6′ 7-1/2″
DISTANCE BETWEEN UPRIGHTS. . . .5′6″
MAXIMUM OPEN HEIGHT. . . . . . . . . . .12″
CLOSED HEIGHT . . . . . . . . . . . . . . . . . . . .8″
STROKE LENGTH. . . . . . . . . . . . . . . . . . . .0 – 4″
APPROACH SPEED. . . . . . . . . . . . . . . . . . .126 IPM
PRESSING SPEED . . . . . . . . . . . . . . . . . . . .49 IPM
RETURN SPEED. . . . . . . . . . . . . . . . . . . . . .187 IPM
WIDTH OF BED . . . . . . . . . . . . . . . . . . . . . .2.75″
HYDRAULIC TANK CAPACITY . . . . . .40 GALLONS
ELECTRICS. . . . . . . . . . . . . . . . . . . . . . . . . .550/60/3 VOLT
DIMENSIONS . . . . . . . . . . . . . . . . . . . . . . . .81″ L X 41″ D X 76″ H
WEIGHT. . . . . . . . . . . . . . . . . . . . . . . . . . . . .5,600 LBS
C/W:
- SOME TOOLS;
- MECHANICAL FOOT BAR;
- RUN/INCH SWITCH;
- ADJUSTABLE OPEN HEIGHT;
- REAR GAUGE;
- WELL MAINTAINED – IN VERY GOOD CONDITION;
DIACRO 12 TON PRESS BRAKE – MODEL 18-48
September 10, 2009 on 1:02 pm | In Press Brake, Brake Press, Hydraulic, Mechanical, Pneumatic, CNC | Comments OffMODEL. . . . . . . . . . . . . . . . . . . . . . . . . . .18-48
SERIAL. . . . . . . . . . . . . . . . . . . . . . . . . . .620047432
TONNAGE . . . . . . . . . . . . . . . . . . . . . . . .12 TONS
BENDING CAPACITY. . . . . . . . . . . . .18 GAUGE MILD STEEL
BED LENGTH. . . . . . . . . . . . . . . . . . . . .48″
DISTANCE BETWEEN UPRIGHTS.25″
SHUT HEIGHT. . . . . . . . . . . . . . . . . . . .7-1/2″
STROKE LENGTH. . . . . . . . . . . . . . . . .1/2″ – 1-1/2″
THROAT DEPTH. . . . . . . . . . . . . . . . . .6-1/2″
BED ADJUSTMENT- UP/DOWN. . . .2″
SPEED. . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 – 52 SPM
ELECTRICS. . . . . . . . . . . . . . . . . . . . . . .230/3/60 VOLT
MOTOR. . . . . . . . . . . . . . . . . . . . . . . . . . .3 HP
APPROX. DIMENSIONS . . . . . . . . . . .48″ W X 28″ D X 65″ H
APPROX. WEIGHT. . . . . . . . . . . . . . . .1,820 LBS
C/W:
- BOTTOM DIE HOLDER – 1-1/2″ H X 2-1/4″ W X 48″ LONG;
C/W: 1/2″ TANG & GRUB SCREWS TO HOLD SINGLE VEE DIES;
- MECHANICAL BAR TYPE FOOT PEDAL;
- 16″ REAR OPERATED MANUAL BACK GAUGE;
- BED HEIGHT ADJUSTABLE WITH HAND CRANK;
- START/STOP BUTTONS & ELECT. DISCONNECT SWITCH;
ALLSTEEL 70 TON x 10 FT HYDRAULIC PRESS BRAKE
July 31, 2009 on 2:52 pm | In Press Brake, Brake Press, Hydraulic, Mechanical, Pneumatic, CNC | Comments OffSERIAL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .154
TONNAGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70 TONS
BED LENGTH. . . . . . . . . . . . . . . . . . . . . . . . . .120″
DISTANCE BETWEEN UPRIGHTS. . . . . .102″
MAXIMUM OPEN HEIGHT. . . . . . . . . . . . .17″
CLOSED HEIGHT . . . . . . . . . . . . . . . . . . . . . .9″
STROKE LENGTH. . . . . . . . . . . . . . . . . . . . . .0 – 8″
THROAT DEPTH. . . . . . . . . . . . . . . . . . . . . . .8″
MAXIMUM BED TILT. . . . . . . . . . . . . . . . . .0.500″
APPROACH SPEED . . . . . . . . . . . . . . . . . . . . .120 IPM
PRESSING SPEED . . . . . . . . . . . . . . . . . . . . . .15 – 60 IPM
RETURN SPEED. . . . . . . . . . . . . . . . . . . . . . . .120 IPM
WIDTH OF BED. . . . . . . . . . . . . . . . . . . . . . . .2.75″
HYDRAULIC TANK CAPACITY. . . . . . . . .40 GALLONS
ELECTRICS . . . . . . . . . . . . . . . . . . . . . . . . . . . .550/60/3 VOLT
MOTOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 HP
APPROX. DIMENSIONS. . . . . . . . . . . . . . . . .120″ L X 50″ D X 94″ H
APPROX. WEIGHT . . . . . . . . . . . . . . . . . . . . .13,600 LBS
C/W:
- 5″ HIGH BOTTOM DIE BOLSTER;
- ELECTRIC FOOT PEDAL;
- RUN/INCH SWITCH;
- ADJUSTABLE PRESSING SPEED;
Powered by WordPress with Pool theme design by Borja Fernandez.
Entries and comments feeds.
Valid XHTML and CSS. ^Top^