MECHANICY FYA-32 – 63″ X 12″ VERTICAL MILLING MACHINE

MODEL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FYA-32 (SIMILAR TO A # 3)
SERIAL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4523
TABLE LENGTH. . . . . . . . . . . . . . . . . . . . . . . .63″ X 12″
TABLE TRAVEL- LONG . . . . . . . . . . . . . . . . .34″ (POWER)
                                       – CROSS. . . . . . . . . . . . . . . . .12″ (POWER)
VERTICAL TRAVEL OF KNEE . . . . . . . . . . .20″ (POWER)
SPINDLE TAPER . . . . . . . . . . . . . . . . . . . . . . . . # 50
SPINDLE SPEEDS  (21). . . . . . . . . . . . . . . . . . .20 – 1,500 RPM
DISTANCE SPINDLE TO TABLE. . . . . . . . .20″
FEEDS – LONG & CROSS (32). . . . . . . . . . . . .0.5 – 42 IPM
RAPID FEEDS – LONG & CROSS . . . . . . . . . .118.23 IPM
                                  – VERTICAL. . . . . . . . . . . . . .59 IPM
ELECTRICS. . . . . . . . . . . . . . . . . . . . . . . . . . . . .550/60/3 VOLT
SPINDLE DRIVE MOTOR. . . . . . . . . . . . . . . .10 HP
DIMENSIONS . . . . . . . . . . . . . . . . . . . . . . . . . . .80″ L X 80″ W X 84″ H
APPROX. WEIGHT . . . . . . . . . . . . . . . . . . . . . .9,200 LBS
C/W:
- COOLANT PUMP;
- VERTICAL HEAD IS A FIXED-HEAD STYLE – NO SWIVEL;
- GOOD MACHINE FOR HOGGING WORK.

ACIERA F5 UNIVERSAL MILLING MACHINE

MODEL. . . . . . . . . . . . . . . . . . . . . . . . . . .F5
SERIAL. . . . . . . . . . . . . . . . . . . . . . . . . . .96-0014
TABLE DIMENSIONS. . . . . . . . . . . . .23-1/2″ X 8-5/8″ (LOWERED TABLE)
TABLE TRAVEL – LONG . . . . . . . . . .16″ (MANUAL & POWER)
TRAVEL OF THE HEADSTOCK. . . .10″ (MANUAL & POWER)
VERTICAL TRAVEL OF KNEE. . . . .18″ (MANUAL & POWER)
SPINDLE TAPER . . . . . . . . . . . . . . . . . .ISO 40
SPINDLE SPEEDS (VARIABLE). . . .50 – 3,400 RPM
QUILL TRAVEL. . . . . . . . . . . . . . . . . . .2-3/8″
FEEDS (ALL DIRECTIONS). . . . . . . .0.4 – 23.6″/MIN
ELECTRICS . . . . . . . . . . . . . . . . . . . . . . .550/60/3 VOLT
SPINDLE DRIVE MOTOR . . . . . . . . . .3 HP
FEED MOTOR (2 SPEED). . . . . . . . . . .1.1/1.5 HP
COOLANT MOTOR . . . . . . . . . . . . . . . . 0.15 HP
DIMENSIONS . . . . . . . . . . . . . . . . . . . . . 60″ W X 52″ D X 69″ H
APPROX. WEIGHT . . . . . . . . . . . . . . . .2,860 LBS
C/W:
- RAPID TRAVERSE SPEEDS – 59″/MIN;
- HEAD PIVOTS – LEFT OR RIGHT – 90 DEGREES;
- MIN/MAX DISTANCE TABLE TO VERTICAL SPINDLE NOSE – 0 – 18-1/2″;
- MIN/MAX DISTANCE TABLE TO HORIZ. SPINDLE AXIS – 0 – 21-1/4″;
- MAX. CUTTER DIAMETER – 9.8″;
- IN EXCELLENT CONDITION!

BRIDGEPORT 2J TURRET MILLING MACHINE

MODEL. . . . . . . . . . . . . . . . . . . . . . . . . . .2J
SERIAL. . . . . . . . . . . . . . . . . . . . . . . . . . .73626-2
TABLE DIMENSIONS. . . . . . . . . . . . .42″ X 9″
TABLE TRAVEL – LONG . . . . . . . . . .30″
                                        - CROSS. . . . . . . . . .12″
VERTICAL TRAVEL OF KN EE. . . .16″
SPINDLE TAPER. . . . . . . . . . . . . . . . . .R8
SPINDLE SPEEDS (VARIABLE). . . .70 – 4,200 RPM
QUILL TRAVEL. . . . . . . . . . . . . . . . . . .5″
QUILL FEEDS (3). . . . . . . . . . . . . . . . . .0.0015″, 0.003″, 0.006″
SPINDLE MOTOR  . . . . . . . . . . . . . . . . .2 HP
ELECTRICS . . . . . . . . . . . . . . . . . . . . . . .575/60/3 VOLT
DIMENSIONS. . . . . . . . . . . . . . . . . . . . . .57″ W X 53″ D X 82″ H
WEIGHT. . . . . . . . . . . . . . . . . . . . . . . . . . .2,130 LBS
C/W:
- MANUAL FEEDS TO TABLE;
- HEAD TILT – FORWARD OR BACKWARD – 45 DEGREES;
- HEAD PIVOT – LEFT OR RIGHT – 90 DEGREES;
- 6″ WIDE MACHINE VISE ON TABLE;

CME 15″ x 75″ UNIVERSAL MILLING MACHINE WITH HURON STYLE HEAD

MODEL. . . . . . . . . . . . . . . . . .  . . . . . . . . . . . .FU 3L CM
SERIAL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3104
TABLE LENGTH. . . . . . . . . . . . . . . . . . . . .75″ X 15″
TABLE TRAVEL – LONG . . . . . . . . . . . . .55″ POWER
                                        – CROSS. . . . . . . . . . . . .14″ POWER
                                        – VERTICAL . . . . . . . .19.7″ POWER
VERT. & HORIZ. SPINDLE TAPERS. . .# 50
VERT. SPINDLE SPEEDS(12) . . . . . . . . .50-2,150 RPM
HORIZ. SPINDLE SPEEDS(18) . . . . . . . .28-1,400 RPM
X & Y FEED RATES(18). . . . . . . . . . . . . . .0.1 – 48.8 INCHES/MIN
VERTICAL FEED RATES . . . . . . . . . . . .0.197 – 17.1 INCHES PER MIN
ELECTRICS. . . . . . . . . . . . . . . . . . . . . . . . .550/60/3 VOLT
TABLE FEED DRIVE MOTOR . . . . . . .5 HP
OVERARM SPINDLE MOTOR . . . . . . .10 HP
HORIZ. SPINDLE DRIVE MOTOR . . .15 HP
DIMENSIONS. . . . . . . . . . . . . . . . . . . . . . .98″ L X 72″ W X 92″ H
APPROX. WEIGHT . . . . . . . . . . . . . . . . . .8,816 LBS
C/W:
- ACCURITE THREE AXIS DRO UNIT;
- PENDANT CONTROLS;
- RAPID FEEDS ALL DIRECTIONS;
- SWIVEL TABLE;
- HURON STYLE VERTICAL HEAD SWIVELS TO ALL ANGLES;
- COOLANT PUMP IN BASE;
- HORIZONTAL ARBORS;

CINCINNATI MODEL 0-8 PLAIN AUTOMATIC PRODUCTION MILL

MODEL. . . . . . . . . . . . . . . . . . . . . .0-8
TYPE . . . . . . . . . . . . . . . . . . . . . . .EA
SERIAL . . . . . . . . . . . . . . . . . . . . .3F1P1K-806
TABLE SIZE. . . . . . . . . . . . . . . . . .23″ LR X 11″ FB
TABLE WORKING SURFACE. . . . . .18″ LR X 6-1/2″ FB
TABLE TRAVEL . . . . . . . . . . . . . . .8″
SPINDLE HEAD – VERT. TRAVEL . .4-1/2″ (HAND CRANK)
SPINDLE CC TO TABLE – MIN . . . .1-1/2″
                                     – MAX. . . .7-1/2″
SPINDLE TAPER . . . . . . . . . . . . . .# 40 MT
SPINDLE SPEEDS (20) . . . . . . . . .75 – 3,000 RPM
LONG. TABLE FEEDS (16). . . . . . .1/2 – 20 IPM
POWER RAPID TABLE TRAVERSE.400 IPM
SPINDLE MOTOR. . . . . . . . . . . . . .1 HP
ELECTRICS . . . . . . . . . . . . . . . . . .550/60/3 VOLT
APPROX. WEIGHT . . . . . . . . . . . . .1,800 LBS
DIMENSIONS. . . . . . . . . . . . . . . . .40″ X 40″ X 68″ H
C/W:
- COOLANT PUMP;
- 1 HORIZONTAL ARBOR & 1 ARBOR SUPPORT;
- CHANGE GEARS;