NARDINI 12″ SWING X 30″ CENTER ENGINE LATHE

November 9, 2011 on 2:05 pm | In Lathe, Engine, Turret | No Comments

MODEL. . . . . . . . . . . . . . . . . . . . . . . . . . . . .TT 1230 E
SERIAL. . . . . . . . . . . . . . . . . . . . . . . . . . . . .B9HHLTT906
HEIGHT OF CENTRES OVER BED. . .6″
SWING OVER BED . . . . . . . . . . . . . . . . . .12″
DISTANCE BETWEEN CENTRES. . . .30″
SWING OVER CROSS SLIDE. . . . . . . . .8″
SPINDLE SPEEDS. . . . . . . . . . . . . . . . . . .50 – 2,500 (VARIABLE)
HOLE THROUGH SPINDLE . . . . . . . . .1-3/8″
SPINDLE & TAILSTOCK TAPERS . . .# 3
SPINDLE NOSE . . . . . . . . . . . . . . . . . . . . .CAMLOCK D 1-3
NUMBER OF FEEDS (128) . . . . . . . . . . .64 CROSS/64 LONG
MOTOR. . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.6 HP & 2.5 HP
ELECTRICS. . . . . . . . . . . . . . . . . . . . . . . . .550/60/3 VOLT
DIMENSIONS . . . . . . . . . . . . . . . . . . . . . . .68″ LX 24″ W X 48″ H
APPROX. WEIGHT . . . . . . . . . . . . . . . . . .1,700 LBS
C/W:
- INCH, METRIC MODULE THREADING;
- 6″ – 3 JAW CHUCK;
- STEADY & FOLLOW RESTS, TABLE STOP;
- SQUARE TOOL HOLDER, BACK PLATE, DRIVE PLATE;
- COLLET CHUCK & 10 COLLETS;
- DRILL CHUCK & ARBOR;
- COOLANT PUMP;

MISAL 13″ X 40″ GAP BED ENGINE LATHE

June 2, 2011 on 6:01 am | In Lathe, Engine, Turret | No Comments

MODEL. . . . . . . . . . . . . . . . . . . . . . . . . . . . .KV13
SERIAL. . . . . . . . . . . . . . . . . . . . . . . . . . . . .9207
HEIGHT OF CENTRES OVER BED. . .6-1/2″
SWING OVER BED . . . . . . . . . . . . . . . . . .13″
SWING OVER GAP . . . . . . . . . . . . . . . . . .18″
SWING OVER CROSS SLIDE . . . . . . . . .7-1/8″
SPINDLE SPEEDS . . . . . . . . . . . . . . . . . . .35 – 2,000 (VARIABLE)
SPINDLE HOLE . . . . . . . . . . . . . . . . . . . . .1-1/2″
SPINDLE/TAILSTOCK TAPERS . . . . .# 3
SPINDLE NOSE. . . . . . . . . . . . . . . . . . . . . .CAMLOCK D 1-4″
NUMBER OF FEEDS . . . . . . . . . . . . . . . . .64
ELECTRICS. . . . . . . . . . . . . . . . . . . . . . . . .550/60/3 VOLT
MOTOR. . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-1/2 & 2-4/5 HP
DIMENSIONS. . . . . . . . . . . . . . . . . . . . . . .72″ L X 32″ W X 52″ H
APPROX. WEIGHT. . . . . . . . . . . . . . . . . .2,200 LBS
C/W:
- INCH, METRIC, MODULE THREADING;
- 8″ – 3 JAW CHUCK;
- STEADY REST, FOLLOW REST, BED STOP, COOLANT PUMP;
- QUICK CHANGE TOOL HOLDER;
- INDUCTION HARDENED BEDWAYS;
 

MISAL 13″ X 40″ GAP BED ENGINE LATHE

June 2, 2011 on 5:31 am | In Lathe, Engine, Turret | No Comments
MODEL. . . . . . . . . . . . . . . . . . . . . . . . . . . KV13
SERIAL. . . . . . . . . . . . . . . . . . . . . . . . . . .9208
HEIGHT OF CENTRES OVER BED.6-1/2″
SWING OVER BED . . . . . . . . . . . . . . . .13″
SWING OVER GAP . . . . . . . . . . . . . . . .18″
SWING OVER CROSS SLIDE . . . . . . .7-1/8″
SPINDLE SPEEDS . . . . . . . . . . . . . . . . .35 – 2,000 (VARIABLE)
HOLE THROUGH SPINDLE. . . . . . . .1-1/2″
SPINDLE/TAILSTOCK TAPERS. . . .# 3
SPINDLE NOSE . . . . . . . . . . . . . . . . . . . . CAMLOCK D 1-4″
NUMBER OF FEEDS. . . . . . . . . . . . . . . .64
ELECTRICS . . . . . . . . . . . . . . . . . . . . . . .550/60/3 VOLT
MOTOR . . . . . . . . . . . . . . . . . . . . . . . . . . .3-1/2 & 2-4/5 HP
DIMENSIONS . . . . . . . . . . . . . . . . . . . . .72″ L X 32″ W X 52″ H
APPROX. WEIGHT . . . . . . . . . . . . . . . .2,200 LBS
C/W:
- INCH, METRIC, MODULE THREADING;
- 6″ – 3 JAW CHUCK;
- STEADY REST, FOLLOW REST, BED STOP, COOLANT PUMP;
- QUICK CHANGE TOOL HOLDER;
- INDUCTION HARDENED BEDWAYS;

 

Powered by WordPress with Pool theme design by Borja Fernandez.
Entries and comments feeds. Valid XHTML and CSS. ^Top^