PIRANHA 50 TON HYDRAULIC IRONWORKER – MODEL: P50 – SOLD
December 1, 2009 on 11:30 am | In Ironworkers, Hydraulic, Mechanical | Comments OffMODEL. . . . . . . . . . . . . . . . . . . . . . . . . . .P 50
SERIAL. . . . . . . . . . . . . . . . . . . . . . . . . . .5349
PUNCH CAPACITY . . . . . . . . . . . . . . .1-1/16″ IN 1/2″ M.S.
. . . . . . . . . . . . .13/16″ IN 3/4″ M.S.
THROAT DEPTH . . . . . . . . . . . . . . . 8″
FLAT BAR SHEAR. . . . . . . . . . . . . .10″ W X 3/4″ FLAT BAR
. . . . . . . . . . . . . .14″ W X 5/8″ FLAT BAR
ANGLE SHEAR . . . . . . . . . . . . . . . .5″ X 5″ X 3/8″ M.S. (90 DEGREES)
ROUNDS. . . . . . . . . . . . . . . . . . . . . .1/4″ TO 1-1/2″
SQUARES. . . . . . . . . . . . . . . . . . . . .1/2″ TO 1″
NOTCHING. . . . . . . . . . . . . . . . . . . .2-3/4″ X 4″ X 1/4″
SPEED. . . . . . . . . . . . . . . . . . . . . . . .60 SPM AT 1/2″ STROKE
OPEN HEIGHT. . . . . . . . . . . . . . . . .13-1/2″
STROKE LENGTH . . . . . . . . . . . . . .4-1/4″
ELECTRICS . . . . . . . . . . . . . . . . . . .550/60/3 VOLT
PUMP MOTOR . . . . . . . . . . . . . . . . .10 HP
DIMENSIONS . . . . . . . . . . . . . . . . .24″ W X 66″ L X 60″ H
APPROX. WEIGHT . . . . . . . . . . . . .2,600 LBS
C/W:
- ELECTRIC FOOT PEDAL;
- QUANTITY OF PUNCHES, DIES, PUNCH HOLDERS,
STRIPPERS, DIE BLOCKS, LENGTH STOPS;
- 8″ BENDING ATTACHMENT WITH 4 WAY DIE;
SCOTCHMAN 65 TON HYDRAULIC IRONWORKER – SOLD
October 2, 2009 on 3:01 pm | In Ironworkers, Hydraulic, Mechanical | Comments OffMODEL. . . . . . . . . . . . . . . . . . . . . . . . . . . . 6509-24M
SERIAL. . . . . . . . . . . . . . . . . . . . . . . . . . . .7708FF1006
NEW. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2008
PUNCH CAPACITY . . . . . . . . . . . . . . . .65 TON
. . . . . . . . . . . . . . . . 1-1/16″ IN 3/4″ M.S.
THROAT DEPTH . . . . . . . . . . . . . . . . . .9″
FLAT BAR SHEAR . . . . . . . . . . . . . . . . .24″ W X 1/4″ M.S.
. . . . . . . . . . . . . . . . .6″ X 1″ M.S.
ANGLE SHEAR – 90 DEGREES. . . . . .6″ X 6″ X 3/8″ M.S.
. . . . . .5″ X 5″ X 1/2″ M.S.
BRAKE – 12″. . . . . . . . . . . . . . . . . . . . . . . .40 TONS
-24″. . . . . . . . . . . . . . . . . . . . . . . . 30 TONS
SPEEDS – IN LIGHT MATERIAL . . . 40 SPM (1/4″ STROKE)
- IN HEAVY MATERIAL. . . 17 SPM(3/4″ STROKE)
ELECTRICS . . . . . . . . . . . . . . . . . . . . . . . 550/60/3 VOLT
PUMP MOTOR. . . . . . . . . . . . . . . . . . . . . 5 HP
DIMENSIONS . . . . . . . . . . . . . . . . . . . . . 60″ L X 24″ W X 66″ H
APPROX. WEIGHT . . . . . . . . . . . . . . . . 2,750 LBS
C/W:
- SHEAR TABLE WITH SCALE, MITRE FENCE, 48″ BACK GAUGE;
- ELECTRIC REMOTE FOOT PEDAL;
- ADJUSTABLE ELECTRIC STROKE CONTROL WITH SCALE;
- PUNCHING GAUGE TABLE WITH FENCE & SCALE;
- PUNCH JOG CONTROL;
- PUNCHES & DIES – 11/32″ – 1-3/16″;
- MACHINE IS LIKE NEW – BARELY USED;
PEDDINGHAUS 55 TON MECHANICAL IRONWORKER – SOLD
February 16, 2007 on 4:06 pm | In Ironworkers, Hydraulic, Mechanical | Comments OffMODEL. . . . . . . . . . . . . . . . . . . . . 210 A/13
SERIAL . . . . . . . . . . . . . . . . . . . . FF 2549
TONNAGE. . . . . . . . . . . . . . . . . . 55
LENGTH OF KNIFE . . . . . . . . . . . .10″
FLATS . . . . . . . . . . . . . . . . . . . . . 6″ X 5/8″ OR 8″ X 1/2″
ANGLES – 90 DEGREES . . . . . . . . 4″ X 4″ X 1/2″
- 45 DEGREES . . . . . . . . 3-1/2″ X 3-1/2″ X 5/16″
TEES – 90 DEGREES . . . . . . . . . . 4″ X 4″ X 3/8″
– 45 DEGREES . . . . . . . . . . 3″ X 3″ X 3/8″
CHANNELS – 90 DEGREES. . . . . . 5″ X 5″ X 1/2″
ROUNDS. . . . . . . . . . . . . . . . . . . 1-5/8″
SQUARES. . . . . . . . . . . . . . . . . . 1-1/2″
NOTCHER – PLATES. . . . . . . . . . 7/16″
– ANGLES & TEES. . . .3″ X 3/8″
PUNCHING. . . . . . . . . . . . . . . . . 1″ X 5/8″
SPEED. . . . . . . . . . . . . . . . . . . . .37 SPM
MOTOR . . . . . . . . . . . . . . . . . . . .5 HP
ELECTRICS . . . . . . . . . . . . . . . . .440/60/3 VOLT
WEIGHT. . . . . . . . . . . . . . . . . . . .2,500 LBS
DIMENSIONS . . . . . . . . . . . . . . . 40″ W X 57″ D X 82″ H
C/W:
- QUANTITY OF PUNCHES & DIES;
- PUNCH HOLDERS & TOOLS;
Powered by WordPress with Pool theme design by Borja Fernandez.
Entries and comments feeds.
Valid XHTML and CSS. ^Top^