PERFECT 6″ X 14″ MANUAL SURFACE GRINDER

March 4, 2010 on 11:47 am | In Grinders, Surface, Rotary | Comments Off

MODEL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PFG 2040 M
SERIAL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9311091
MANUFACTURED IN . . . . . . . . . . . . . . . . .1993
MAGNETIC CHUCK SIZE . . . . . . . . . . . . .6″ X 14″
LONGITUDINAL TABLE TRAVEL . . . .18″
CROSS TABLE TRAVEL. . . . . . . . . . . . . . .9″
DISTANCE SPINDLE TO TABLE . . . . . .18″
SURFACE OF TABLE. . . . . . . . . . . . . . . . . .16″ X 7-1/4″
GRINDING WHEEL . . . . . . . . . . . . . . . . . . .8″ X 3/4″ X 1-1/4″ BORE
GRINDING WHEEL MOTOR. . . . . . . . . . .2 HP @ 3,450 RPM
ELECTRICS. . . . . . . . . . . . . . . . . . . . . . . . . . .575/60/3 VOLT
NET WEIGHT. . . . . . . . . . . . . . . . . . . . . . . . .1,386 LBS
DIMENSIONS . . . . . . . . . . . . . . . . . . . . . . . . .46″ LR X 46″ FB X 66″ H
C/W:
- 6″ X 14″ MAGNETIC CHUCK;
- TABLE GUIDES ON BALL ROLLING WAY;
- ONE SHOT LUBRICATION – HAND PUMP;
- ON/OFF SWITCH;
- EMERGENCY MUSHROOM STOP;
- TABLE IS BUILT WITH A DRAIN & COVERS IF YOU WANT TO ADD A COOLANT;

CHEVALIER 6″ X 12″ MANUAL SURFACE GRINDER

September 18, 2009 on 9:27 am | In Grinders, Surface, Rotary | Comments Off
MODEL. . . . . . . . . . . . . . . . . . . . . . . . . . . . FSG 612C
SERIAL. . . . . . . . . . . . . . . . . . . . . . . . . . . . O1C-5239
MAGNETIC CHUCK SIZE . . . . . . . . . . 6″ X 12″
LONGITUDINAL TABLE TRAVEL .13″
CROSS TABLE TRAVEL. . . . . . . . . . . .6-3/4″
SURFACE OF TABLE. . . . . . . . . . . . . . .12″ X 5-3/4″
DIST. TABLE TO SPINDLE CC . . . . .18″
GRINDING WHEEL. . . . . . . . . . . . . . . .8″ X 1/2″ – 3/4″X 1-1/4″ BORE
GRINDING WHEEL MOTOR . . . . . . .1 HP
ELECTRICS . . . . . . . . . . . . . . . . . . . . . . .575/60/3 VOLT
WEIGHT . . . . . . . . . . . . . . . . . . . . . . . . . .1,100 LBS
DIMENSIONS. . . . . . . . . . . . . . . . . . . . . .42″ LR X 37″ FB X 67″ H
C/W:
- 6″ X 12″ WALKER MAGNETIC CHUCK;
- 1 SHOT HAND PUMP LUBRICATION;
- ON/OFF SWITCH;
- EMERGENCY MUSHROOM STOP;

 

CHEVALIER 6′ X 18″ MANUAL SURFACE GRINDER – SOLD

May 15, 2009 on 1:32 pm | In Grinders, Surface, Rotary | Comments Off

MODEL. . . . . . . . . . . . . . . . . . . . . . . . . . . . .FSG 618M
SERIAL. . . . . . . . . . . . . . . . . . . . . . . . . . . . .A 3784028
MAGNETIC CHUCK SIZE . . . . . . . . . . .6″ X 18″
LONGITUDINAL TABLE TRAVEL. .19″
CROSS TABLE TRAVEL . . . . . . . . . . . .7″
SURFACE OF TABLE . . . . . . . . . . . . . . .18″ X 5-3/4″
GRINDING WHEEL . . . . . . . . . . . . . . . .8″ X 1/2″ – 3/4″ X 1-1/4″ BORE
GRINDING WHEEL MOTOR. . . . . . . .1.33 HP @ 3,450 RPM
ELECTRICS. . . . . . . . . . . . . . . . . . . . . . . .575/60/3 VOLT
NET WEIGHT. . . . . . . . . . . . . . . . . . . . . .1,482 LBS
DIMENSIONS. . . . . . . . . . . . . . . . . . . . . . 53″ LR X 35″ FB X 67″ H
C/W:
- 6″ X 18″ MAGNETIC CHUCK;
- HEAVY DUTY DUST COLLECTOR, 575 VOLT, 20″ X 16″ X 24″ H;
- 1 SHOT LUBRICATION – HAND PUMP;
- HALOGEN LIGHT;
- FULL TOOL BOX;
- EXTRA WHEEL FLANGES;
- ON/OFF SWITCH;

FREEPORT 6″ X 18″ MANUAL SURFACE GRINDER – SOLD

October 23, 2008 on 1:50 pm | In Grinders, Surface, Rotary | No Comments

MODEL. . . . . . . . . . . . . . . . . . . . .SGS-618
SERIAL . . . . . . . . . . . . . . . . . . . .8402281
LONGITUDINAL TABLE TRAVEL. .19″
CROSS TABLE TRAVEL . . . . . . . . 6-3/4″
MAX. HEIGHT WHEEL TO TABLE. 15″
SURFACE OF TABLE . . . . . . . . . . 18″ X 5-3/4″
GRINDING WHEEL . . . . . . . . . . .  7″ X 1/2″ X 1-1/4″ BORE
WHEEL SPINDLE SPEED. . . . . . .  3,450 RPM
GRINDING WHEEL MOTOR. . . . .  1 HP
ELECTRICS . . . . . . . . . . . . . . . . .550/60/3 VOLT
WEIGHT. . . . . . . . . . . . . . . . . . . .1,300 LBS
DIMENSIONS . . . . . . . . . . . . . . . .53″ LR X 39″ FB X 64″ H
C/W:
- 6″ X 18″ MAGNETIC CHUCK;
- 1 SHOT LUBRICATION BY HAND PUMP;
- BALANCING WHEEL UNIT;
- SPARE GRINDING WHEELS;
A - SMS - Stock - Grinder, Surface, Freeport - 2.JPG A - SMS - Stock - Grinder, Surface, Freeport - 1.JPG A - SMS - Stock - Grinder, Surface, Freeport - 3.JPG

CHEVALIER 16″ X 32″ HYDRAULIC SURFACE GRINDER

April 25, 2008 on 8:19 am | In Grinders, Surface, Rotary | Comments Off

MODEL. . . . . . . . . . . . . . . . . . . . . . .FSG-1632ADll
SERIAL . . . . . . . . . . . . . . . . . . . . . .GB 917002
INSTALLED NEW. . . . . . . . . . . . . . .2003
TABLE SIZE. . . . . . . . . . . . . . . . . . 15-3/4″ X 31-1/2″
MAGNETIC CHUCK SIZE . . . . . . . . 15-3/4″ X 31-1/2″
MAXIMUM GRINDING – LONG . . . . 32″
                                  – CROSS . . . 16″
TABLE TO SPINDLE CENTRE. . . . . 24-3/4″
LONG TABLE HYD. TRAVEL. . . . . . 33-7/16″
LONG TABLE MANUAL TRAVEL. . . 35-3/8″
TABLE SPEED – INF. VAR. . . . . . . 16 – 82 FPM
CROSS RAPID TRAVEL . . . . . . . . 12 FPM
CROSS TRAVEL INCREMENT. . . . 1/8″ – 1-1/4″
CROSS MANUAL TRAVEL. . . . . . . 18″
CROSS – HANDWHEEL . . . . . . . . .0.25″/REV & GRAD.
CROSS – MICROFEED – REV . . . . .0.005″
                                  – GRAD . . . .0.00005″
WHEELHEAD – AUTO INFEED. . . . .0.00005″ – 0.002″
                     – HANDWHEEL . . . . .0.05″/REV
                     - HANDWHEEL . . . . .0.0005″/GRAD
                     – MICROFEED. . . . . .0.00005″ & 0.0001″
                     – RAPID TRAVEL . . .25 IPM
SPINDLE MOTOR . . . . . . . . . . . . . 5 HP @ 1,750 RPM
GRINDING WHEEL . . . . . . . . . . . . 14″ OD X 2″ TH. X 5″ BORE
HYDRAULIC DRIVE MOTOR . . . . . 2 HP
CROSS FEED DRIVE MOTOR. . . . . 1/6 HP
ELEVATING DRIVE MOTOR. . . . . . 1/4 HP
APPROX. DIMENSIONS. . . . . . . . . 132″ L X 68″ W X 76″ H
APPROX. WEIGHT . . . . . . . . . . . . 6,400 LBS
C/W:
- HYDRAULIC TANK;
- COOLANT/FILTRATION UNIT;
- 16″ X 32″ ELECTRO-MAGNETIC CHUCK;
- 575/60/3 VOLT ELECTRICS;
- MINT CONDITION!
- CAN BE INSPECTED IN-PLANT UNDER POWER;
A - SMS - Available - Grinder, Surface, Chevalier, 16 x 32 - 1.JPG A - SMS - Available - Grinder, Surface, Chevalier, 16 x 32 - 2.JPG A - SMS - Available - Grinder, Surface, Chevalier, 16 x 32 - 3.JPG A - SMS - Available - Grinder, Surface, Chevalier, 16 x 32 - 4.JPG A - SMS - Available - Grinder, Surface, Chevalier, 16 x 32 - 5.JPG

JAKOBSEN 8″ X 24″ HYDRAULIC SURFACE GRINDER

October 9, 2007 on 3:26 pm | In Grinders, Surface, Rotary | Comments Off

MODEL. . . . . . . . . . . . . . . . . . . . . . . SJ-12
POWER LONG. TABLE TRAVEL. . . . . 20″
POWER CROSS TABLE TRAVEL . . . .10″
MAX. HEIGHT TABLE TO WHEEL . . .16″
SURFACE OF TABLE. . . . . . . . . . . . .20″ X 7″
GRINDING WHEEL. . . . . . . . . . . . . .10″ X 1-1/2″ X 3″ BORE
WHEEL SPINDLE SPEED . . . . . . . . .2,880 RPM
VARIABLE LONG. TABLE SPEEDS . .0 – 60 FPM
VARIABLE CROSS TABLE SPEEDS . 0 – 27 FPM
GRINDING WHEEL MOTOR. . . . . . . 2 HP
HYDRAULIC PUMP MOTOR. . . . . . . 1 HP
COOLANT PUMP MOTOR . . . . . . . . 0.16 HP
ELECTRICS . . . . . . . . . . . . . . . . . . 208/60/3 VOLT
NET WEIGHT . . . . . . . . . . . . . . . . .2,425 LBS
APPROX. DIMENSIONS. . . . . . . . . .78″ LR X 56″ FB X 66″ H
C/W:
- 8″ X 24″ MAGNETIC CHUCK;
- WHEEL DRESSER;
- MOTORISED AND MANUAL HEIGHT ADJ. TO GRINDING WHEEL;
- 1 SHOT LUBRICATION;
- COOLANT TANK – 19″ x 22″ x 13″ H;
A - SMS - Stock - Grinder, Surface, Jakobsen, SJ-12, 8 x 24 - 3.JPG A - SMS - Stock - Grinder, Surface, Jakobsen, SJ-12, 8 x 24 - 1.JPG A - SMS - Stock - Grinder, Surface, Jakobsen, SJ-12, 8 x 24 - 2.JPG

NEW WEBER DRY SLAG GRINDING MACHINE

November 14, 2006 on 12:51 pm | In Grinders, Surface, Rotary | Comments Off

MODEL. . . . . . . . . . . . . . . . . .BLC 1-600
CONVEYOR WIDTH . . . . . . . .23.5″
DRIVE MOTOR. . . . . . . . . . . .20 HP TEFC
CONVEYOR MOTOR . . . . . . . .2 HP AC FREQUENCY
CONV. HEIGHT MOTOR. . . . . .1/4 HP
ABRASIVE BELT SIZE . . . . . . 25″ X 75″
CONTACT ROLL . . . . . . . . . . . 5.1″ DIAMETER
CONVEYOR SPEED . . . . . . . . . 6 – 36 FPM
THICKNESS CAPACITY. . . . . . 0.20″ TO 4″
AIR. . . . . . . . . . . . . . . . . . . . . 2 CFM @ 90 PSI
C/W:
- PATENTED BOLT BEAM PROVIDES EVEN GRINDING PRESSURE ON ALL EDGES;
- PARTS AS MUCH AS 3 MM OUT OF LEVEL CAN BE GROUND;
- LASER TRACKING SENSOR SYSTEM;
- AUTOMATIC THICKNESS SET-UP DEVICE;
- WYE/DELTA SOFT START ON  MAIN DRIVE MOTOR;
- SEALED BEARINGS;
A - SMS - Stock - Grinder, Slag, Weber - 1.JPG A - SMS - Stock - Grinder, Slag, Weber - 21.JPG

JAKOBSEN 8″ X 18″ HYDRAULIC SURFACE GRINDER

October 23, 2006 on 3:20 pm | In Grinders, Surface, Rotary | Comments Off

MODEL. . . . . . . . . . . . . . . . . . . . . . . .SJ-17
SERIAL . . . . . . . . . . . . . . . . . . . . . . .17-6728
LONGITUDINAL HYD. TRAVEL. . . . . .18″|
CROSS TRAVEL (MANUAL) . . . . . . . .8″
MAX. HEIGHT – WHEEL TO TABLE. . .15″
SURFACE OF TABLE . . . . . . . . . . . . .20″ X 7″
GRINDING WHEEL . . . . . . . . . . . . . .8″ X 3/4″ X 2″ BORE
WHEEL SPINDLE SPEED. . . . . . . . . .3,450 RPM
VARIABLE LONG. SPEED . . . . . . . . .0 – 60 FPM
GRINDING WHEEL MOTOR. . . . . . . .2 HP
HYDRAULIC PUMP MOTOR. . . . . . . .0.75 HP
COOLANT PUMP MOTOR . . . . . . . . .0.153 HP
ELECTRICS . . . . . . . . . . . . . . . . . . .550/60/3 VOLTS
APPROX. WEIGHT . . . . . . . . . . . . . .1,900 LBS
DIMENSIONS. . . . . . . . . . . . . . . . . .72″ L-R X 43″ F-B X 63″ H
C/W:
- 6″ X 18″ MAGNETIC CHUCK;
- COOLANT TANK – 19″ X 23″ X 14″ H;
- 1 SHOT LUBRICATION;
A - SMS - Stock - Grinder, Surface, Jakobsen, 6 x 18 - 1.JPG A - SMS - Stock - Grinder, Surface, Jakobsen, 6 x 18 - 2.JPG

Powered by WordPress with Pool theme design by Borja Fernandez.
Entries and comments feeds. Valid XHTML and CSS. ^Top^