» Deburring Machine, Sheet Deburring Machine, Flat Sheet Deburring Machine, Finishing Machine, Graining Machine, Edge Sheet Deburring Machine

RAND BRIGHT (MIDWEST SANDRIGHT) 52″ WIDE DRY DEBURRING MACHINE

admin — Fri, 11 Feb 2011 22:51:30 +0000

MODEL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .S5275 DRY
SERIAL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1781-4099
NEW. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SEPT. 2001
WORKING WIDTH. . . . . . . . . . . . . . . . . . . . . . . .52″
BED OPENING. . . . . . . . . . . . . . . . . . . . . . . . . . . .0 – 6″ (MANUAL)
CONVEYOR SPEED . . . . . . . . . . . . . . . . . . . . . . .0 – 60 FPM (VARIABLE)
INFEED LOADING AREA . . . . . . . . . . . . . . . . .18″
OUTFEED AREA. . . . . . . . . . . . . . . . . . . . . . . . . .18″
MAIN DRUM MOTOR. . . . . . . . . . . . . . . . . . . . .30 HP
CONVEYOR MOTOR. . . . . . . . . . . . . . . . . . . . . .1 HP
ELECTRICS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .575/60/3 VOLT
APPROX. DIMENSIONS. . . . . . . . . . . . . . . . . . .90″ W X 60″ D X 70″ H
APPROX. WEIGHT. . . . . . . . . . . . . . . . . . . . . . . .3,500 LBS
C/W:
- 6″ DIAMETER RUBBER COVERED DRUM;
- 4 X HOLD DOWN ROLLS (2 INFEED & 2 OUTFEED);
- MANUAL BED HEIGHT ADJUSTMENT WITH MECHANICAL READ-OUT;
- 4 X HEAVY DUTY JACKS UNDERNEATH CONVEYOR BED;
- ABRASIVE BELT TRACKING LEVER;
- ECCENTRIC ON DRUM HEAD ALLOWS USE OF EITHER ABRASIVE
BELTS OR SCOTCHBRITE BELTS;
- MACHINE IS IN VERY GOOD CONDITION;

FALLS PRODUCTS MODEL 99 DEBURRING MACHINE

admin — Tue, 30 Jun 2009 00:48:47 +0000

MODEL. . . . . . . . . . . . . . . . . . . . . . . . . . . . .99

CAPACITY. . . . . . . . . . . . . . . . . . . . . . . . . . .24 GAUGE TO 1/4″

WIDTH. . . . . . . . . . . . . . . . . . . . . . . . . . . . . FROM 1/2″

LENGTH. . . . . . . . . . . . . . . . . . . . . . . . . . . . FROM 4″

MOTOR. . . . . . . . . . . . . . . . . . . . . . . . . . . . .1/4 HP

ELECTRICS. . . . . . . . . . . . . . . . . . . . . . . . . .110/60/1 VOLT

APPROX. DIMENSIONS. . . . . . . . . . . . . . . . . .22″ W X 15″ H X 19″ D

WEIGHT. . . . . . . . . . . . . . . . . . . . . . . . . . . .75 LBS

C/W:

- COMPACT TABLE TOP MODEL;

- DEBURRS BOTTOM EDGE IN A SINGLE PASS;

- ON/OFF SWITCH

FALLS PRODUCTS MODEL 121 DEBURRING MACHINE

admin — Tue, 30 Jun 2009 00:36:30 +0000

MODEL. . . . . . . . . . . . . . . . . . . . . . . . .121
SERIAL. . . . . . . . . . . . . . . . . . . . . . . . .2603
CAPACITY – THICKNESS . . . . . . .24 GAUGE TO 1/4″
                           – WIDTH. . . . . . . . . . . .FROM 1/2″ TO 4 FT OR MORE
                           - LENGTH . . . . . . . . . .FROM 4 FT TO 10 FT OR MORE
SPEED . . . . . . . . . . . . . . . . . . . . . . . . .UP TO 60 FPM
DEBURRING HEAD MOTOR. . . .1/4 HP GEARED HEAD
BRUSH HEAD MOTOR . . . . . . . . .1/3 HP SPLIT PHASE
ELECTRICS. . . . . . . . . . . . . . . . . . . .110/1/60 VOLT
APPROX. DIMENSIONS . . . . . . . .48″ W X 27″ D X 48″ H
WEIGHT. . . . . . . . . . . . . . . . . . . . . . .475 LBS
C/W:
- FLOOR STANDING MACHINE;
- DEBURRS TOP & BOTTOM EDGE IN A SINGLE PASS;
- SMOOTHS THE VERTICAL EDGES OF SHAKER PARTS
   ELIMINATING “SCALLOP” MARKS;
- USES TWO TOOLBITS – ONE TOP, ONE BOTTOM;
- ALSO HAS MOTORISED BRUSH TO SMOOTH EDGES;
- ON/OFF SWITCH;

FALLS PRODUCTS MODEL 131 DEBURRING MACHINE

admin — Thu, 13 Nov 2008 00:49:19 +0000

MODEL. . . . . . . . . . . . . . . . . . . . . .131
SERIAL . . . . . . . . . . . . . . . . . . . . .3025
CAPACITY – THICKNESS . . . . . . . .24 GAUGE – 1/4″
                 - WIDTH. . . . . . . . . . . .FROM 1/2″ TO 4′ OR MORE
                 - LENGTH . . . . . . . . . . .FROM 4″ TO 10′ OR MORE
SPEED . . . . . . . . . . . . . . . . . . . . . .UP TO 60 FPM
MOTOR – DEBURRING . . . . . . . . . .1/4 HP GEARED HEAD MOTOR
MOTOR – SANDING HEAD. . . . . . . .1/3 HP SPLIT PHASE
ELECTRICS . . . . . . . . . . . . . . . . . . 110/1/60 VOLT
APPROX. DIMENSIONS . . . . . . . . . 48″ W X 27″ D X 48″ H
APPROX. WEIGHT. . . . . . . . . . . . . 475 LBS
C/W:
- FLOOR STANDING MACHINE;
- DEBURRS TOP & BOTTOM EDGES IN A SINGLE PASS;
- SMOOTHES THE VERTICAL EDGES OF SHAKER PARTS
  ELIMINATING “SCALLOP” MARKS IN THE SAME OPERATION;
- USES TWO TOOLBITS – ONE TOP, ONE BOTTOM;
- ON/OFF SWITCH;
- GOOD FOR STAINLESS STEEL, STEEL, ALUMINUM, BRASS, ETC.
- IN “LIKE NEW” CONDITION;

EMPIRE EF-2436 SAND BLAST CABINET & DUST COLLECTOR – SOLD

admin — Wed, 12 Nov 2008 21:44:09 +0000

MODEL. . . . . . . . . . . . . . . . . . . . .2436
SERIAL . . . . . . . . . . . . . . . . . . . .C-16189
CABINET INSIDE DIMENSIONS. .36″ LR X 24″ FB
ELECTRICS . . . . . . . . . . . . . . . . .110/1/60 VOLT
DIMENSIONS. . . . . . . . . . . . . . . .37″ W X 40″ D X 67″ H
APPROX. WEIGHT . . . . . . . . . . . .500 LBS
C/W:
- DUST COLLECTOR UNIT AT REAR;
- LINED GLOVES INSIDE CABINET;
- BLAST GUN INSIDE CABINET;
- LIGHT INSIDE CABINET;
- AIR INPUT;
- REGULATOR & GAUGE;
- FOOT PEDAL TO REGULATE AIR;
- ON/OFF SWITCH;

AEM 37″ WIDE DEBURRING MACHINE – MODEL 501-37 DRY

admin — Thu, 16 Oct 2008 16:41:18 +0000

MODEL. . . . . . . . . . . . . . . . . . . . . . . .501-37 PRO METAL
MACHINE NUMBER. . . . . . . . . . . . . . .MO 6245
NEW. . . . . . . . . . . . . . . . . . . . . . . . . .1992
WORKING WIDTH . . . . . . . . . . . . . . .37″
BED OPENING . . . . . . . . . . . . . . . . . .0 – 5-1/2″ (MANUAL)
CONVEYOR SPEED. . . . . . . . . . . . . . .15 – 45 FPM (VARIABLE)
INFEED LOADING AREA. . . . . . . . . . .23″
BRUSH HEAD MOTOR. . . . . . . . . . . . .20 HP
CONVEYOR BELT MOTOR. . . . . . . . . .1 HP
ELECTRICS . . . . . . . . . . . . . . . . . . . . 575/60/3 VOLT
DIMENSIONS. . . . . . . . . . . . . . . . . . . 63″ L X 75″ W X 67″ H
APPROX. WEIGHT . . . . . . . . . . . . . . . 2,200 LBS
C/W:
- USES 37″ WIDE X 60″ LONG ABRASIVE BELTS;
- 4 X HOLD DOWN ROLLS (2 INFEED & 2 OUTFEED);
- MANUAL BED HEIGHT ADJUSTMENT;
- MACHINE HAS BEEN REBUILT – DRUM, ROLLS, SENSORS, CONVEYOR BELT;
- ORIGINALLY BUILT AS A WET MACHINE – ORIGINAL OWNER CONVERTED
IT TO A DRY DEBURRING MACHINE WITH PROPER DUST HOOD;

STROKE SANDER – PROGRESS 96″ X 30″ CAPACITY

admin — Thu, 17 Apr 2008 23:47:28 +0000

MODEL. . . . . . . . . . . . . . . . . . . . .PMC-264-6
TABLE – LENGTH . . . . . . . . . . . . .96″
– WIDTH. . . . . . . . . . . . . .30″
VERTICAL ADJUSTMENT. . . . . . .26″
ABRASIVE BELT. . . . . . . . . . . . .6″ X 264″ (APPROX)
MOTOR. . . . . . . . . . . . . . . . . . . .5 HP
ELECTRICS . . . . . . . . . . . . . . . .550/60/3 VOLT
FLOOR SPACE . . . . . . . . . . . . . .50″ W X 140″ L
WEIGHT. . . . . . . . . . . . . . . . . . .1,100 LBS
C/W:
- MANUALLY ADJUSTABLE UP/DOWN TABLE WITH HAND WHEEL;
- TRAVELLING HEAD;
- ABRASIVE BELT SPEED – 4,300 S.F.P.M;
- RUBBER COVERED DRIVE PULLEY;
- DUST HOODS;
- ON/OFF SWITCH;

CEMCO 37 INCH WIDE DEBURRING/FINISHING MACHINE

admin — Sun, 10 Jun 2007 04:53:02 +0000

MODEL. . . . . . . . . . . . . . . . . . . .2137 MB
MACHINE NUMBER. . . . . . . . . . .JP 910
NEW. . . . . . . . . . . . . . . . . . . . . .1997
WORKING WIDTH . . . . . . . . . . .37″
BED OPENING . . . . . . . . . . . . . .0 – 6″ MANUAL
CONVEYOR SPEED. . . . . . . . . . .15 – 60 FPM (VARIABLE)
INFEED LOADING AREA. . . . . . .24″
BRUSH MOTOR. . . . . . . . . . . . . .15 HP
CONVEYOR MOTOR . . . . . . . . . .1 HP
ELECTRICS . . . . . . . . . . . . . . . .575/60/3 VOLT
APPROX. DIMENSIONS . . . . . . .94″ L X 75″ W X 73″ H
APPROX. WEIGHT . . . . . . . . . . .3,500 LBS
C/W:
- ONE 37″ W X 8″ OD SCOTCHBRITE ROLL – TURNS & OSCILLATES;
- 4 X HOLD DOWN ROLLS (2 INFEED & 2 OUTFEED);
- MANUAL BRUSH HEIGHT ADJUSTMENT WITH GAUGE;
- LOAD METER & HOUR METER SHOWING 179 HRS OF USAGE;
- 110 VOLT CONTROLS;
- 4 HEAVY DUTY JACKS UNDER CONVEYOR BED;
NOTE: WITH A SCOTCHBRITE ROLL – YOU WILL GET A NICE SURFACE FINISH
AND GOOD DEBURRED EDGES – BUT ONLY A LIGHT GRAIN.
MACHINE IS “LIKE NEW”.

MIDWEST SANDRIGHT DRY SINGLE HEAD DEBURRING/GRAINING MACHINE – NEW

admin — Mon, 31 Jul 2006 17:43:32 +0000

MODEL. . . . . . . . . . . . . . . . . . . .P1 37 X 75
WIDTH. . . . . . . . . . . . . . . . . . . .37″
ABRASIVE BELT MOTOR . . . . . .20 HP
ELECTRICS . . . . . . . . . . . . . . . .575/60/3 VOLT
VARIABLE FEED SPEEDS. . . . . .0 – 40 FPM
BED OPENING. . . . . . . . . . . . . .0 – 6″
ABRASIVE BELT SIZE. . . . . . . .37″ W X 75″ L
INFEED CONVEYOR LENGTH . . .18″
OUTFEED CONVEYOR LENGTH. .18″
DIAMETER OF FEED ROLL. . . . .6″ OD
DIAMETER OF IDLER ROLL. . . .6″ OD
JACKS UNDER BED . . . . . . . . . 4
C/W:
- MOTORISED BED HEIGHT ADJUSTMENT WITH DRO;
- ELECTRONIC TRACKING OF ABRASIVE BELTS;
- PNEUMATIC CONVEYOR BELT TRACKING;
- DOUBLE INFEED HOLDDOWN ROLLS;
- DOUBLE OUTFEED HOLDDOWN ROLLS;
- ECCENTRIC ABRASIVE HEAD TO ALLOW OPERATOR TO SWITCH FROM
THIN ABRASIVE BELTS TO THICKER SCOTCHBRITE BELTS;
- LOAD METER SHOWS TORQUE ON MOTOR;
- EMERGENCY STOPS;
- 100% MANUFACTURED IN THE USA;
- PARTS & SERVICE FROM SMS IN TORONTO;