ALCECO 22 TON OBI MECHANICAL PUNCH PRESS – SOLD
December 14, 2009 on 11:08 am | In Presses, Punch, Mechanical, Hydraulic, OBI, Metal Stamping, Metal Forming | Comments OffMODEL. . . . . . . . . . . . . . . . . . . . . . . . .22-IP
SERIAL. . . . . . . . . . . . . . . . . . . . . . . . .198
CAPACITY . . . . . . . . . . . . . . . . . . . . .22 TON
STROKE. . . . . . . . . . . . . . . . . . . . . . . .2-1/2″
SHUT HEIGHT. . . . . . . . . . . . . . . . .9″ (OVER BOLSTER)
BOLSTER DIMENSIONS. . . . . . . .20″ LR X 12″ FB X 1-1/2″ THICK
AREA OF BED. . . . . . . . . . . . . . . . . .20″ LR X 12″ FB
RAM ADJUSTMENT . . . . . . . . . . .3″
DIA. HOLE FOR PUNCH. . . . . . . .1-1/2″ RD
THROAT DEPTH . . . . . . . . . . . . . .7-1/4″
SPEED. . . . . . . . . . . . . . . . . . . . . . . . .125 SPM
MOTOR . . . . . . . . . . . . . . . . . . . . . . . 2 HP
ELECTRICS . . . . . . . . . . . . . . . . . . . 550/60/3 VOLT
DIMENSIONS. . . . . . . . . . . . . . . . . .33″ LR X 65″ FB X 85″ H
WEIGHT . . . . . . . . . . . . . . . . . . . . . .2,500 LBS
C/W:
- MECHANICAL CLUTCH;
- MECHANICAL FOOT PEDAL;
- ON/OFF SWITCH;
AZIMUTH (ALCECO) 33 TON DEEP THROAT OBI PUNCH PRESS
December 10, 2009 on 7:14 am | In Presses, Punch, Mechanical, Hydraulic, OBI, Metal Stamping, Metal Forming | Comments OffCAPACITY . . . . . . . . . . . . . . . . . . . . . . .33 TON
STROKE . . . . . . . . . . .. . . . . . . . . . . . . . . 2-1/2″
SHUT HEIGHT (SDAU). . . . . . . . . . .9-3/4″ (OVER BOLSTER)
BOLSTER DIMENSONS. . . . . . . . . . .24″ LR X 14″ FB X 1-3/4″ THICK
AREA OF BED. . . . . . . . . . . . . . . . . . . .24″ LR X 14″ FB
RAM ADJUSTMENT . . . . . . . . . . . . .3″
DIA. HOLE FOR PUNCH STEM . . .1-1/2″ RD
THROAT DEPTH . . . . . . . . . . . . . . . .18″
SPEED. . . . . . . . . . . . . . . . . . . . . . . . . . .100 SPM
MOTOR. . . . . . . . . . . . . . . . . . . . . . . . . .2 HP
ELECTRICS. . . . . . . . . . . . . . . . . . . . . .550/60/3 VOLT
DIMENSIONS . . . . . . . . . . . . . . . . . . . .33″ LR X 65″ FB X 85″ H
WEIGHT. . . . . . . . . . . . . . . . . . . . . . . . .3,950 LBS
C/W:
- MECHANICAL CLUTCH;
- MECHANICAL FOOT PEDAL;
- DISCONNECT ON/OFF SWITCH;
PIRANHA 50 TON HYDRAULIC IRONWORKER – MODEL: P50 – SOLD
December 1, 2009 on 11:30 am | In Ironworkers, Hydraulic, Mechanical | Comments OffMODEL. . . . . . . . . . . . . . . . . . . . . . . . . . .P 50
SERIAL. . . . . . . . . . . . . . . . . . . . . . . . . . .5349
PUNCH CAPACITY . . . . . . . . . . . . . . .1-1/16″ IN 1/2″ M.S.
. . . . . . . . . . . . .13/16″ IN 3/4″ M.S.
THROAT DEPTH . . . . . . . . . . . . . . . 8″
FLAT BAR SHEAR. . . . . . . . . . . . . .10″ W X 3/4″ FLAT BAR
. . . . . . . . . . . . . .14″ W X 5/8″ FLAT BAR
ANGLE SHEAR . . . . . . . . . . . . . . . .5″ X 5″ X 3/8″ M.S. (90 DEGREES)
ROUNDS. . . . . . . . . . . . . . . . . . . . . .1/4″ TO 1-1/2″
SQUARES. . . . . . . . . . . . . . . . . . . . .1/2″ TO 1″
NOTCHING. . . . . . . . . . . . . . . . . . . .2-3/4″ X 4″ X 1/4″
SPEED. . . . . . . . . . . . . . . . . . . . . . . .60 SPM AT 1/2″ STROKE
OPEN HEIGHT. . . . . . . . . . . . . . . . .13-1/2″
STROKE LENGTH . . . . . . . . . . . . . .4-1/4″
ELECTRICS . . . . . . . . . . . . . . . . . . .550/60/3 VOLT
PUMP MOTOR . . . . . . . . . . . . . . . . .10 HP
DIMENSIONS . . . . . . . . . . . . . . . . .24″ W X 66″ L X 60″ H
APPROX. WEIGHT . . . . . . . . . . . . .2,600 LBS
C/W:
- ELECTRIC FOOT PEDAL;
- QUANTITY OF PUNCHES, DIES, PUNCH HOLDERS,
STRIPPERS, DIE BLOCKS, LENGTH STOPS;
- 8″ BENDING ATTACHMENT WITH 4 WAY DIE;
Powered by WordPress with Pool theme design by Borja Fernandez.
Entries and comments feeds.
Valid XHTML and CSS. ^Top^