MODEL. . . . . . . . . . . . . . . . . . . . .137-2HDCMW
SERIAL . . . . . . . . . . . . . . . . . . . .18926Y
NEW . . . . . . . . . . . . . . . . . . . . . . . . . . .1988
CONVEYOR BELT WIDTH. . . . . . . . . . . .36″
1 ST HEAD – ABRASIVE BELT SIZE. . . .37″ W X 60″ L
ABRASIVE BELT MOTOR. . . . . . . . . . . .20 HP
FIXED PASSLINE HEIGHT. . . . . . . . . . .38″
HEIGHT ADJUSTMENT TO HEAD . . . . . .0 – 8″ OPENING
2 ND HEAD – SCOTCHBRITE ROLL. . . . .36″ WIDE
SCOTCHBRITE ROLL MOTOR. . . . . . . . .7-1/2 HP
CONVEYOR SPEED FEED . . . . . . . . . . . .15 – 45 FPM
ELECTRICS. . . . . . . . . . . . . . . . . . . . . .575/60/3 VOLT
C/W:
- APF-40 LP COOLANT/FILTER UNIT;
- AIR OPERATED DISC BRAKES;
- DIGITAL READOUT THICKNESS OPENING:
- LOAD METERS FOR MOTORS;
- POSI-TRACK SOLD STATE TRACKING;
- DRYER ON EXIT END;
- MACHINE IN OPERATION AS OF MARCH 9, 2009;
- MACHINE IN GOOD WORKING CONDITION – BUT NEEDS A CLEAN;
- CUSTOMER HAS PURCHASED NEW MACHINE WITH DIFFERENT
  CONFIGURATION WHICH IS BETTER SUITED FOR THEIR JOB;
     

MODEL. . . . . . . . . . . . . . . . . . . . . . .3VS
TABLE DIMENSIONS . . . . . . . . . . . .48″ L X 10″ W
TABLE LONGITUDINAL TRAVEL. . . .36″ (POWER)
TABLE CROSS TRAVEL . . . . . . . . . .17.5″ (MANUAL)
VERTICAL TABLE TRAVEL  . . . . . . .17.5″ (MANUAL)
SPINDLE TAPER. . . . . . . . . . . . . . . .R 8
SPINDLE SPEEDS. . . . . . . . . . . . . . .60 – 4,200 RPM (VARIABLE)
SPINDLE STROKE . . . . . . . . . . . . . .5″
SPINDLE DRIVE MOTOR . . . . . . . . .3 HP
ELECTRICS. . . . . . . . . . . . . . . . . . .550/60/3 VOLT
LONGITUDINAL FEED MOTOR. . . . .1/4 HP (110 VOLT)
APPROXIMATE WEIGHT. . . . . . . . .3,000 LBS
APPROXIMATE DIMENSIONS. . . . .64″ W X 59″ D X 85″ W
C/W:
- MITUTOYO TWO AXIS DRO UNIT;
- POWER LONGITUDINAL FEED TO TABLE;
- FORWARD/REVERSE SWITCH;
- VISE ON TABLE;
     

CAPACITY. . . . . . . . . . . . . . . . . . . . . . .# 4 M.T.
SERIAL. . . . . . . . . . . . . . . . . . . . . . . . .31656
SPINDLE TO COLUMN. . . . . . . . . . . . . .5″ TO 30″ ADJUSTABLE
SPINDLE TO TABLE . . . . . . . . . . . . . . .4″ TO 31″ ADJUSTABLE
SPINDLE TO BASE . . . . . . . . . . . . . . . .35″ TO 53″ ADJUSTABLE
VERTICAL HEAD ADJUSTMENT. . . . . . .0 – 12″ (POWER)
TABLE HEIGHT ADJUSTMENT. . . . . . . .0 – 16″ (POWER)
SPINDLE TRAVEL. . . . . . . . . . . . . . . . .6″
COLUMN DIAMETER. . . . . . . . . . . . . . .6″
SPINDLE SPEEDS (8). . . . . . . . . . . . . .60 – 900 RPM
TABLE SIZE. . . . . . . . . . . . . . . . . . . . .40″ LR X 20″ FB
REAR BASE SIZE. . . . . . . . . . . . . . . . .24″ LR X 20-1/2 FB
POWER FEED RATE. . . . . . . . . . . . . . .0 TO 6 IPM (VARIABLE)
MAIN SPINDLE MOTOR. . . . . . . . . . . .1.5 & 3 HP (2 SPEED)}
ELECTRICS. . . . . . . . . . . . . . . . . . . . .208/60/3 VOLT
DIMENSIONS . . . . . . . . . . . . . . . . . . .41″ LR X 64″ FB X 87″ H
APPROX. WEIGHT. . . . . . . . . . . . . . . .2,400 LBS
C/W:
- POWER HEIGHT ADJUSTMENT TO HEAD;
- POWER & MANUAL HEIGHT ADJUSTMENT TO TABLE;
- TAPPING CAPABILITY – FORWARD & REVERSE SWITCH;
- POWER LOCKING SWITCH;
- 360 DEGREE ROTATION OF DRILL HEAD;