» 2008 » October

VERTICUT ROLL-IN 10″ X 12″ VERTICAL BANDSAW – SOLD

October 27, 2008 on 3:34 pm | In Saw, Cut-Off, Horizontal Bandsaw, Vertical Bandsaw | Comments Off

MODEL. . . . . . . . . . . . . . . . . . . . .1012
SERIAL . . . . . . . . . . . . . . . . . . . .1943
CAPACITY. . . . . . . . . . . . . . . . . .10″ X 12″
BLADE SIZE . . . . . . . . . . . . . . . .1/4″ – 3/4″
CUTTING SPEEDS (3). . . . . . . . .75/130/262
TABLE SIZE . . . . . . . . . . . . . . . .18″ X 30″ STEEL
MOTOR. . . . . . . . . . . . . . . . . . . .3/4 HP
ELECTRICS. . . . . . . . . . . . . . . . .115/230/1/60 VOLT
APPROX. DIMENSIONS. . . . . . . .30″ W X 49″ D X 67″ H
APPROX. WEIGHT. . . . . . . . . . . .795 LBS
C/W:
- FOUR WHEEL CASTERS;
- DEPTH STOP;
- MITRE BLOCK;
- C CLAMP;
- ON/OFF SWITCH;

DARBERT 13″ X 40″ GAP BED ENGINE LATHE – SOLD

October 24, 2008 on 3:03 pm | In Lathe, Engine, Turret | Comments Off

MODEL. . . . . . . . . . . . . . . . . . . . .DB-1000
SERIAL . . . . . . . . . . . . . . . . . . . .13482120671
SWING OVER BED. . . . . . . . . . . . 13-3/8″|
SWING OVER CROSS SLIDE . . . . 8-1/4″
SWING IN GAP . . . . . . . . . . . . . . 22″
CENTRE DISTANCE. . . . . . . . . . . 40″
SPINDLE SPEEDS (8) . . . . . . . . . 80 – 2,000 RPM (H/L)
SPINDLE BORE . . . . . . . . . . . . . .1-1/2″
SPINDLE TAPER . . . . . . . . . . . . .# 5 MT
TAILSTOCK TAPER. . . . . . . . . . . # 3 MT
ELECTRICS. . . . . . . . . . . . . . . . .575/50/3 VOLT
SPINDLE MOTOR. . . . . . . . . . . . .3 HP
DIMENSIONS. . . . . . . . . . . . . . . 78″ L X 30″ W X 48″ H
APPROX. WEIGHT . . . . . . . . . . . 2,650 LBS
C/W:
- 8″ – 3 JAW CHUCK WITH CAMLOCK SPINDLE;
- INCH/MM THREADING;
- LONG. & CROSS SLIDE AUTOMATIC FEED;
- MICROMETER BED STOP, SQUARE TOOL POST,
THREAD DIAL INDICATOR, 1/2″ DRILL CHUCK
& ARBOR, LIVE CENTRE;
- COOLANT PUMP IN BASE, COOLANT TRAY & REAR
SPLASH GUARD;

FREEPORT 6″ X 18″ MANUAL SURFACE GRINDER – SOLD

October 23, 2008 on 1:50 pm | In Grinders, Surface, Rotary | No Comments

MODEL. . . . . . . . . . . . . . . . . . . . .SGS-618
SERIAL . . . . . . . . . . . . . . . . . . . .8402281
LONGITUDINAL TABLE TRAVEL. .19″
CROSS TABLE TRAVEL . . . . . . . . 6-3/4″
MAX. HEIGHT WHEEL TO TABLE. 15″
SURFACE OF TABLE . . . . . . . . . . 18″ X 5-3/4″
GRINDING WHEEL . . . . . . . . . . . 7″ X 1/2″ X 1-1/4″ BORE
WHEEL SPINDLE SPEED. . . . . . . 3,450 RPM
GRINDING WHEEL MOTOR. . . . . 1 HP
ELECTRICS . . . . . . . . . . . . . . . . .550/60/3 VOLT
WEIGHT. . . . . . . . . . . . . . . . . . . .1,300 LBS
DIMENSIONS . . . . . . . . . . . . . . . .53″ LR X 39″ FB X 64″ H
C/W:
- 6″ X 18″ MAGNETIC CHUCK;
- 1 SHOT LUBRICATION BY HAND PUMP;
- BALANCING WHEEL UNIT;
- SPARE GRINDING WHEELS;

LUNA MODEL 50″ X 1/8″ INITIAL PINCH BENDING ROLLS – SOLD

October 23, 2008 on 1:42 pm | In Roll, Angle, Pinch | No Comments

MODEL. . . . . . . . . . . . . . . . . . . . . MBR 8266
REFERENCE. . . . . . . . . . . . . . . . . 0069
SIZE . . . . . . . . . . . . . . . . . . . . . . 12/35
SERIAL . . . . . . . . . . . . . . . . . . . . 2864
CAPACITY. . . . . . . . . . . . . . . . . . 1/8″ MILD STEEL
MAXIMUM SHEET LENGTH. . . . . . 50″
ROLL DIAMETERS . . . . . . . . . . . . 4″ OD
ROLLING SPEED. . . . . . . . . . . . . .15 FT/MIN APPROX.
MOTOR. . . . . . . . . . . . . . . . . . . . .1.1 KW
ELECTRICS. . . . . . . . . . . . . . . . . .575/60/3 VOLT
APPROX. WEIGHT. . . . . . . . . . . . .1,600 LBS
DIMENSIONS . . . . . . . . . . . . . . . . 82″ L X 22″ W X 39″ H
C/W:
- ROLLS MANUFACTURED TO A TENSILE STRENGTH OF 700N/mm2;
- ROLLS ARE CROWNED;
- TOP ROLL SWINGS OUT;
- UPPER & LOWER ROLLS ARE DRIVEN BY A GEAR MOTOR;
- MANUAL HEIGHT SETTINGS OF UPPER & LOWER ROLLS
BY HANDWHEELS;
- DOUBLE ELECTRIC FOOT PEDAL – FORWARD/REVERSE;
- MACHINE IS MINT!

L & J 50 TON AIR CLUTCH OBI PUNCH PRESS – SOLD

October 17, 2008 on 11:08 am | In Presses, Punch, Mechanical, Hydraulic, OBI, Metal Stamping, Metal Forming | No Comments

MODEL. . . . . . . . . . . . . . . . . . . . . . .5
SERIAL . . . . . . . . . . . . . . . . . . . . . .51661
CAPACITY. . . . . . . . . . . . . . . . . . . .50 TONS
STROKE . . . . . . . . . . . . . . . . . . . . . 4″
SHUT HEIGHT. . . . . . . . . . . . . . . . . 10-1/4″ OVER BED
BOLSTER . . . . . . . . . . . . . . . . . . . . 30-1/4″ LR X 18″ FB X 2-1/2″ THICK
RAM ADJUSTMENT . . . . . . . . . . . . . 3″
RAM AREA . . . . . . . . . . . . . . . . . . . 11-3/4″ FB X 12-1/4″ LR
DIA. HOLE FOR PUNCH STEM. . . . . 2-1/2″ RD
BED AREA . . . . . . . . . . . . . . . . . . . .29-1/4″ LR X 18-1/4″ FB
THROAT DEPTH . . . . . . . . . . . . . . . .9-1/2″
SPEED . . . . . . . . . . . . . . . . . . . . . . .100 SPM
MOTOR . . . . . . . . . . . . . . . . . . . . . . 3 HP @ 1,175 RPM
ELECTRICS . . . . . . . . . . . . . . . . . . .575/60/3 VOLT
APPROX. WEIGHT . . . . . . . . . . . . . .6,700 LBS
DIMENSIONS. . . . . . . . . . . . . . . . . .38″ LR X 51″ FB X 102″ H
C/W:
- AIR CLUTCH;
- ELECTRIC FOOR PEDAL;
- PALM BUTTONS ON PEDESTAL STAND;
- FORWARD/STOP/REVERSE SWITCH;
- FOOT/OFF/HAND;
- ONCE/JOG/CONTINUOUS;

AEM 37″ WIDE DEBURRING MACHINE – MODEL 501-37 DRY

October 16, 2008 on 7:11 am | In Deburring Machine, Finishing, Graining, Sandblast | Comments Off

MODEL. . . . . . . . . . . . . . . . . . . . . . . .501-37 PRO METAL
MACHINE NUMBER. . . . . . . . . . . . . . .MO 6245
NEW. . . . . . . . . . . . . . . . . . . . . . . . . .1992
WORKING WIDTH . . . . . . . . . . . . . . .37″
BED OPENING . . . . . . . . . . . . . . . . . .0 – 5-1/2″ (MANUAL)
CONVEYOR SPEED. . . . . . . . . . . . . . .15 – 45 FPM (VARIABLE)
INFEED LOADING AREA. . . . . . . . . . .23″
BRUSH HEAD MOTOR. . . . . . . . . . . . .20 HP
CONVEYOR BELT MOTOR. . . . . . . . . .1 HP
ELECTRICS . . . . . . . . . . . . . . . . . . . . 575/60/3 VOLT
DIMENSIONS. . . . . . . . . . . . . . . . . . . 63″ L X 75″ W X 67″ H
APPROX. WEIGHT . . . . . . . . . . . . . . . 2,200 LBS
C/W:
- USES 37″ WIDE X 60″ LONG ABRASIVE BELTS;
- 4 X HOLD DOWN ROLLS (2 INFEED & 2 OUTFEED);
- MANUAL BED HEIGHT ADJUSTMENT;
- MACHINE HAS BEEN REBUILT – DRUM, ROLLS, SENSORS, CONVEYOR BELT;
- ORIGINALLY BUILT AS A WET MACHINE – ORIGINAL OWNER CONVERTED
IT TO A DRY DEBURRING MACHINE WITH PROPER DUST HOOD;