MODEL. . . . . . . . . . . . . . . . . . . . .US 130
SERIAL . . . . . . . . . . . . . . . . . . . .2627
NEW . . . . . . . . . . . . . . . . . . . . . .1979
CAPACITY – MILD STEEL. . . . . . .3/16″ (5 MM)
CUTTING RAKE ANGLE . . . . . . . .1.7 DEGREES
CUTTING LENGTH . . . . . . . . . . . .121″
NUMBER OF HOLD DOWNS. . . . . .14
SPEED . . . . . . . . . . . . . . . . . . . . .27 SPM
THROAT DEPTH . . . . . . . . . . . . . .6″
OIL CAPACITY. . . . . . . . . . . . . . .25 GALLONS
BACK GAUGE DEPTH . . . . . . . . . .31-1/2″
BED HEIGHT . . . . . . . . . . . . . . . .35-1/2″
MAIN MOTOR . . . . . . . . . . . . . . .10 HP
ELECTRICS. . . . . . . . . . . . . . . . .575/60/3 VOLTS
DIMENSIONS . . . . . . . . . . . . . . .136″ L X 78″ F-B X 79″ H
APPROX. WEIGHT. . . . . . . . . . . .8,400 LBS
C/W:
- POWER FRONT OPERATED BACK GAUGE WITH COUNTER;
- HIGH CHROME, HIGH CARBON BLADES;
- ELECTRIC FOOT PEDAL;
- MANUAL QUICK BLADE GAP ADJUSTMENT;
- SINGLE OR CONTINUOUS STROKE;
- SHADOW LIGHT;
       

MODEL. . . . . . . . . . . . . . . . . . . . .15 L
SERIAL . . . . . . . . . . . . . . . . . . . .3675
CAPACITY. . . . . . . . . . . . . . . . . .40 TON
STROKE . . . . . . . . . . . . . . . . . . .3-1/4″
SHUT HEIGHT. . . . . . . . . . . . . . .7-3/4″ (OVER BOLSTER)
BOLSTER DIMENSIONS . . . . . . .28″ LR X 18″ FB X 2″ THICK
AREA OF BED. . . . . . . . . . . . . . .28″ LR X 18″ FB
THROAT DEPTH . . . . . . . . . . . . .9-7/8″
RAM ADJUSTMENT. . . . . . . . . . .2-1/2″
HOLE IN RAM FOR PUNCH . . . . .1-1/2″ RD
SPEED . . . . . . . . . . . . . . . . . . . .100 SPM
MOTOR . . . . . . . . . . . . . . . . . . . 5 HP
ELECTRCIS . . . . . . . . . . . . . . . .550/60/3 VOLT
DIMENSIONS. . . . . . . . . . . . . . .42″ LR X 54″ FB X 88″ H
APPROX. WEIGHT . . . . . . . . . . .3,950 LBS
C/W:
- MECHANICAL CLUTCH;
- MECHANICAL FOOT PEDAL;
- ON/OFF SWITCH;
    

MODEL. . . . . . . . . . . . . . . . . . . . . 2 G
SERIAL . . . . . . . . . . . . . . . . . . . . 267
CAPACITY. . . . . . . . . . . . . . . . . . 15 TON
STROKE. . . . . . . . . . . . . . . . . . . . 2″
SHUT HEIGHT (SDAU). . . . . . . . . 6-3/4″ (OVER BOLSTER)
BOLSTER DIMENSIONS. . . . . . . .16″ LR X 12-1/2″ FB X 1″ THICK
RAM ADJUSTMENT . . . . . . . . . . . 1-3/4″
HOLE IN RAM FOR PUNCH . . . . . 1-9/16″ RD
THROAT DEPTH . . . . . . . . . . . . . 18″
AREA OF BED. . . . . . . . . . . . . . . 11″ LR CX 16″ FB
SPEED . . . . . . . . . . . . . . . . . . . . 180 SPM
MOTOR . . . . . . . . . . . . . . . . . . . .1 HP
ELECTRICS . . . . . . . . . . . . . . . . .550/60/3 VOLT
DIMENSIONS. . . . . . . . . . . . . . . .23″ LR X 42″ FB X 75″ H
APPROX. WEIGHT . . . . . . . . . . . .1,900 LBS
C/W:
- MECHANICAL CLUTCH;
- MECHANICAL FOOT PEDAL;
- ON/OFF SWITCH;
- STROKE COUNTER;

MODEL. . . . . . . . . . . . . . . . . . . . . .RT 4 140 X 146
SERIAL . . . . . . . . . . . . . . . . . . . . .RT 8-102-A
NEW . . . . . . . . . . . . . . . . . . . . . . .1987
TONNAGE . . . . . . . . . . . . . . . . . . .140 TONS
BED LENGTH. . . . . . . . . . . . . . . . .146″
DISTANCE BETWEEN UPRIGHTS .122″
MAXIMUM OPEN HEIGHT. . . . . . . 17″
CLOSED HEIGHT . . . . . . . . . . . . . 9″
STROKE LENGTH . . . . . . . . . . . . . 8″
THRAOT DEPTH . . . . . . . . . . . . . .12″
APPROACH SPEED . . . . . . . . . . . .236 IPM
PRESSING SPEED. . . . . . . . . . . . .16 IPM
RETURN SPEED . . . . . . . . . . . . . .155 IPM
HYDRAULIC TANK . . . . . . . . . . . .42 GALLONS
MOTOR. . . . . . . . . . . . . . . . . . . . .10 HP
ELECTRICS. . . . . . . . . . . . . . . . . .208/60/3 VOLT
DIMENSIONS . . . . . . . . . . . . . . . .160″ L X 56″ W X 103″ H
APPROX. WEIGHT. . . . . . . . . . . . .25,300 LBS
C/W:
- CYBELEC MODEL DNC 7400 PS CNC CONTROL – 3 AXES – Y1,Y2,X;
- CNC HYDRAULIC BED DEFLECTION;
- ELECTRIC FOOT PEDAL & PALM BUTTONS;
- 6-1/4″ HIGH SINGLE VEE BOTTOM TOOL HOLDER;
- WELL MAINTAINED AND IN GOOD CONDITION;
     
 

MODEL. . . . . . . . . . . . . . . . . . . . .S 1025
NEW . . . . . . . . . . . . . . . . . . . . . .2001
BLADE LENGTH. . . . . . . . . . . . . .10 FT
CUTTING CAPACITY. . . . . . . . . .1/4″ MILD STEEL
                                . . . . . . . . . .3/16″ STAINLESS STEEL
POWER BACK GAUGE . . . . . . . . .36″ WITH DRO
CUTTING SPEED . . . . . . . . . . . . .17 SPM AT FULL STROKE
NUMBER OF HOLD DOWNS. . . . . .12
GAP IN BED. . . . . . . . . . . . . . . . . 6″
CUTTING ANGLE OF BLADE. . . . . 1 DEG. 30 MINUTES
OIL CAPACITY . . . . . . . . . . . . . . 62 GALLONS
MOTOR. . . . . . . . . . . . . . . . . . . . 10 HP
ELECTRICS . . . . . . . . . . . . . . . . .575/60/3 VOLT
DIMENSIONS. . . . . . . . . . . . . . . .152″ L X 80″ W X 63″ H
APPROX. WEIGHT. . . . . . . . . . . .14,600 LBS
C/W:
- 10 FT FRONT SQUARING ARM;
- 2 X 4 FT FRONT SUPPORT ARMS;
- BALL SUPPORTS IN TABLE;
- ELECTRIC FOOT PEDAL;
   

MACINE INSTALLED NEW. . . . . . . .1999 
BENDING LENGTH. . . . . . . . . . . . . .120″
DISTANCE BETWEEN HOUSINGS . .102″
MAXIMUM OPEN HEIGHT . . . . . . . .17″
CLOSED HEIGHT. . . . . . . . . . . . . . .9″
STROKE LENGTH. . . . . . . . . . . . . . .8″
THROAT DEPTH. . . . . . . . . . . . . . . .10″
MAXIMUM RAM TILT. . . . . . . . . . . .0.625″
APPROACH SPEED. . . . . . . . . . . . . 375 IPM
PRESSING SPEED . . . . . . . . . . . . . 40 IPM
RETURN SPEED. . . . . . . . . . . . . . . .400 IPM
RAM REPEATABILITY. . . . . . . . . . .+/-.0004″
BED WIDTH . . . . . . . . . . . . . . . . . .3.75″
MOTOR HORSEPOWER. . . . . . . . . .25 HP
OIL CAPACITY. . . . . . . . . . . . . . . .50 GALLONS
FOUNDATION REQUIRED. . . . . . . . FLOOR MOUNTED
DIMENSIONS. . . . . . . . . . . . . . . . .127″ L X 56.5″ W X 109.5″ H
APPROX. WEIGHT . . . . . . . . . . . . .17,500 LBS
C/W:
- CYBELEC CNC MODEL 50 CONTROL;
- Y1, Y2 & X AXES;
- ALL PROGRAMMABLE – TONNAGE, PRESSING SPEEDS, RAM DWELL,
                                        STROKE LENGTHS, BACK GAUGE RETRACTS,
                                        BUMP FORMING, INCH/METRIC, PARTS
                                        COUNTER, TOOL STORAGE UP TO 30 DIES
                                        & 20 PUNCHES, MEMORY FOR 25 PRODUCTS
                                        WITH 8 BENDS EACH OR 225 DIFFERENT 
                                        SEQUENCES;
- 24″ DEEP CNC BACK GAUGE WITH 8″ MANUAL HEIGHT ADJUSTMENT;
- CNC HYDRAULIC BED DEFLECTION;
- T SLOT MACHINED IN BED TOP;
- CROWNED BOTTOM BOLSTER;
- PALM BUTTONS & FOOT PEDAL;
- IN EXCELLENT CONDITION!