MODEL. . . . . . . . . . . . . . . . . . .18″
SERIAL . . . . . . . . . . . . . . . . . .38013
NEW . . . . . . . . . . . . . . . . . . . .1973
MAX. NO. OF CUTS . . . . . . . . .6 CUTS IN .064″ MILD STEEL
                              . . . . . . . . .20 CUTS IN .005″
CUTTER DIAMETER. . . . . . . . .6 INCH
LINE SPEEDS . . . . . . . . . . . . .100 & 200 FPM
STRIP WIDTHS TOLERANCE. .+/-.002″
ARBOR DIAMETER . . . . . . . . .2.955 INCH
MOTOR. . . . . . . . . . . . . . . . . .7-1/2 HP
ELECTRICS. . . . . . . . . . . . . . .550/60/3 VOLT
  

MODEL. . . . . . . . . . . . . . . . . . . . . . . . H 2512
SERIAL . . . . . . . . . . . . . . . . . . . . . . . H 4-180
NEW . . . . . . . . . . . . . . . . . . . . . . . . . 1997
CAPACITY – MILD STEEL. . . . . . . . . . 1/4″
                 - STAINLESS. . . . . . . . . . . 7 GAUGE
CUTTING LENGTH . . . . . . . . . . . . . . . 144″
CLEARANCE BETWEEN FRAMES . . . . 154″
NUMBER OF HOLDDOWNS. . . . . . . . . 16
SPEED. . . . . . . . . . . . . . . . . . . . . . . . 16 – 50 SPM
THROAT DEPTH. . . . . . . . . . . . . . . . . 3″
HYDRAULIC OIL CAPACITY . . . . . . . 50 GALLONS
BACK GAUGE RANGE. . . . . . . . . . . . .36″ SWING-UP
BED HEIGHT . . . . . . . . . . . . . . . . . . .32″
MAIN MOTOR . . . . . . . . . . . . . . . . . .20 HP
ELECTRICS. . . . . . . . . . . . . . . . . . . .440/60/3 VOLT
WEIGHT . . . . . . . . . . . . . . . . . . . . . .20,500 LBS
DIMENSIONS. . . . . . . . . . . . . . . . . . .181″ L X 76″ W X 73″ H
C/W:
- WYSONG PC-100 CNC BACK GAUGE CONTROL;
- H.C.H.C BLADES ON MACHINE;
- ELECTRIC FOOT PEDAL;
- MANUAL QUICK BLADE GAP ADJUSTMENT;
- 10 FT FRONT SQUARING ARM;
- 2 X 48″ FRONT SUPPORT ARMS;
        

MODEL. . . . . . . . . . . . . . . . . . . . . . 3350 SUPERDUTY
SERIAL . . . . . . . . . . . . . . . . . . . . . 2862
SLITTING WIDTHS . . . . . . . . . . . . 1-1/2″ – 49-15/16″ WIDE
MAXIMUM GAUGE . . . . . . . . . . . . . 30 – 16 GAUGE MILD STEEL
ARBOR DIAMETER. . . . . . . . . . . . . 3″
CUTTING SPEED . . . . . . . . . . . . . . 60 FPM
MOTOR . . . . . . . . . . . . . . . . . . . . .3/4 HP GEARTYPE MOTOR
ELECTRICS . . . . . . . . . . . . . . . . . .110/60/1 VOLT
WEIGHT. . . . . . . . . . . . . . . . . . . . .600 LBS
DIMENSIONS . . . . . . . . . . . . . . . . .62″ W X 36″ D X 42″ HSIMPLE OPERATION- ADJUST KNIVES TO DESIRED WIDTHS OF CUT,
                                  LOCK-IN PLACE WITH ALLEN KEY, SWITCH-
                                  ON AND FEED-IN MATERIAL.
C/W:
- 2 SETS OF STANDARD 3″ X 5″ X 3/4″ WIDE CARBON-STEEL TOOLING;
- GAUGE MOUNTING ON EACH SIDE PERMITS LEFT OR RIGHT SIDE OPERATION;
- GARY “QUICKSET” DESIGN KNIVES FROM TOOLSTEEL;
- KNIVES ARE OUTBOARD MOUNTED FOR EASY ACCESS;
- KNIVES ARE REVERSIBLE FOR LONGER LIFE;
- “ADIPRENE” STRIPPER RINGS ARE NON-MARKING & HOLD MATERIAL FLAT;
  

MODEL. . . . . . . . . . . . . . . . . . . .3354
SERIAL . . . . . . . . . . . . . . . . . . .1309
SLITTING WIDTHS . . . . . . . . . .1″ – 24″ WIDE
MAXIMUM GAUGE . . . . . . . . . . .16 GAUGE MILD STEEL
MOTOR . . . . . . . . . . . . . . . . . . .1/3 HP GEARMOTOR
ELECTRICS . . . . . . . . . . . . . . . .110/60/1 VOLT
WEIGHT. . . . . . . . . . . . . . . . . . .315 LBS
DIMENSIONS. . . . . . . . . . . . . . .36″ W X 41″ D X 18″ HSIMPLE OPERATION – MOVE POINTER TO DESIRED WIDTH OF CUT, 
                                   LOCK-IN PLACE WITH HAND KNOBS, SWITCH
                                   ON AND FEED-IN MATERIAL.
C/W:
- DIE-STE TYPE GAUGE MOUNTING;
- GAUGE OUNTING RODS;
- GARY “QUICKSET” DESIGN KNIVES FROM TOOLSTEEL;
- KNIVES ARE OUTBOARD MOUNTED FOR EASY ACCESS;
- “ADIPRENE” STRIPPER RINGS ARE NON-MARKING & HOLD MATERIAL FLAT;
- BENCH STYLE MACHINE – STAND EXTRA;