10 FT X 18 GAUGE BROWN BOGGS FLOOR MODEL HAND BRAKE

July 28, 2010 on 11:27 am | In Brakes, Hand, Box & Pan | No Comments

MODEL . . . . . . . . . . . . . . . . . . . . . . . . . . . 1018
SERIAL . . . . . . . . . . . . . . . . . . . . . . . . . . . 10019
CAPACITY. . . . . . . . . . . . . . . . . . . . . . . .10 FT X 18 GAUGE MILD STEEL
. . . . . . . . . . . . . . . . . . . . . . . .10 FT X 22 GAUGE MILD STEEL
BENDING LENGTH . . . . . . . . . . . . . . .121″
BEAM OPENING . . . . . . . . . . . . . . . . . . 1-5/8″
SHIPPING WEIGH . . . . . . . . . . . . . . . .2,000 LBS
FLOOR SPACE C/W: WEIGHTS . . . .148″ L X 27″ W X 64″ H
C/W:
- TWO COUNTERWEIGHTS;
- ON WHEELS;

DEVILBISS 25 HP HORIZONTAL AIR COMPRESSOR

July 28, 2010 on 11:14 am | In Air Compressor | No Comments

HORIZONTAL TANK CAPACITY . . . . . . . . . . . . .120 GALLONS
100 PSI RATING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100 CFM DELIVERY
150 PSI RATING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .93 CFM DELIVERY
MAXIMUM PSI RATING. . . . . . . . . . . . . . . . . . . . . .175
MOTOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25 HP
ELECTRICS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .575/60/3 VOLT
APPROX. WEIGHT. . . . . . . . . . . . . . . . . . . . . . . . . . . .1,200 LBS
DIMENSIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72″ LX 30″ W X 66″ H
C/W:
- TWO STAGE V HEAD;
- PRESSURE GAUGE;
- PRESSURE SWITCH – 115 PSI TO 150PSI
- PRESSURE OVERLOAD;
- MANUAL DRAIN UNDERNEATH;

KEETONA 10 FT X 10 GAUGE A/C MECHANICAL SHEAR

July 12, 2010 on 5:00 am | In Shear, Hydraulic, Mechanical, Power, Foot, Circle | No Comments

MODEL. . . . . . . . . . . . . . . . . . . . . . . . . SHEARMATIC KSMTIF
SERIAL. . . . . . . . . . . . . . . . . . . . . . . . .ASM.1208102
BLADE LENGTH. . . . . . . . . . . . . . . .122″
CUTTING CAPACITY. . . . . . . . . . .10 GAUGE MILD STEEL
. . . . . . . . . . .12 GAUGE STAINLESS STEEL
POWER BACK GAUGE. . . . . . . . . . .36″ WITH READ-OUTS
CUTTING SPEED . . . . . . . . . . . . . . .60 SPM
MOTOR. . . . . . . . . . . . . . . . . . . . . . . . .10 HP
ELECTRICS. . . . . . . . . . . . . . . . . . . . .575/60/3 VOLT
FLOOR SPACE. . . . . . . . . . . . . . . . . . .178″ W X 72″ D X 54″ H
WEIGHT. . . . . . . . . . . . . . . . . . . . . . . .11,000 LBS
C/W:
- AIR OPERATED CLUTCH & BRAKE;
- INCH & METRIC MECHANICAL READOUTS FOR BACKGAUGE;
- CAM OPERATED HOLD DOWNS;
- 1 X 8 FT SQUARING ARM WITH SCALE;
- 2 X FRONT SHEET SUPPORT ARMS;
- 1 X ELECTRIC FOOT PEDAL;
- SINGLE/CONTINUOS STROKE SWITCH;
- 1 SHOT MANUAL LUBRICATION;

WHITNEY JENSEN 5 TON DEEP THROAT KICK PRESS

May 20, 2010 on 7:18 am | In Presses, Kick, Arbor, Manual | Comments Off

MODEL. . . . . . . . . . . . . . . . . . . . . . . . . . .68
SERIAL. . . . . . . . . . . . . . . . . . . . . . . . . . .2066-1074
CAPACITY . . . . . . . . . . . . . . . . . . . . . . .5 TONS
THROAT DEPTH . . . . . . . . . . . . . . . . .24″
LOWER DIE BLOCK HOLDER . . . . .4-1/8″ FB X 5-3/8″ LR
HEIGHT OF THROAT . . . . . . . . . . . . 5-3/4″
STROKE. . . . . . . . . . . . . . . . . . . . . . . . . . 1″
ADJUSTMENT OF RAM . . . . . . . . . . 1″
DIE SPACE – SDAU . . . . . . . . . . . . . . . 5″
DIAMETER OF RAM HOLE. . . . . . .1″
DIMENSIONS. . . . . . . . . . . . . . . . . . . .42″ w x 43″ D x 48″ H
WEIGHT . . . . . . . . . . . . . . . . . . . . . . . . 675 LBS
C/W:
- 42″ L-R X 20″ F-B STEEL TABLE;
- FLOOR STAND;
- FEW PUNCHES & DIES;

WYSONG 100 TON x 10 FT HYDRAULIC PRESS BRAKE, MTH II HS 100-120

May 4, 2010 on 9:08 am | In Press Brake, Brake Press, Hydraulic, Mechanical, CNC | Comments Off

MODEL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MTH II HS 100-120
SERIAL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TH 1-128
NEW. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2000
TONNAGE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100 TONS
BED LENGTH. . . . . . . . . . . . . . . . . . . . . . . . . . .120″
DISTANCE BETWEEN UPRIGHTS. . . . . . .102″
MAXIMUM OPEN HEIGHT. . . . . . . . . . . . . .17″
CLOSED HEIGHT. . . . . . . . . . . . . . . . . . . . . . .9″
STROKE LENGTH. . . . . . . . . . . . . . . . . . . . . . .0 – 8″
THROAT DEPTH. . . . . . . . . . . . . . . . . . . . . . . .7″
MAXIMUM RAM TILT . . . . . . . . . . . . . . . . . .+/- 1/4″
APPROACH SPEED. . . . . . . . . . . . . . . . . . . . . . 400 IPM
PRESSING SPEED. . . . . . . . . . . . . . . . . . . . . . . .40 IPM
RETURN SPEED . . . . . . . . . . . . . . . . . . . . . . . . .425 IPM
WIDTH OF BED. . . . . . . . . . . . . . . . . . . . . . . . . .4.25″
HYDRAULIC TANK CAPACITY . . . . . . . . . .35 GALLONS
ELECTRICS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .550/60/3 VOLT
MOTOR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 HP
APPROX. DIMENSIONS . . . . . . . . . . . . . . . . . .127″ L X 57″ D X 106.5″ H
APPROX. WEIGHT. . . . . . . . . . . . . . . . . . . . . . .15,000 LBS
C/W:
- BOTTOM BOLSTER – 10 FT LONG X 3-1/2″ HIGH;
- TWO PALM BUTTONS ON STANDS;
- BED & RAM MACHINED FOR ANGLE BRACKETS;
- ANGLE BRACKETS TOP & BOTTOM/ FRONT & BACK;
- AUTO LUBRICATION UNIT;
- RUN/INCH SWITCH;
- ADJUSTABLE PRESSURE DIAL;
- TWO SETS TYPE 3 SAFETY LIGHTS – FRONT AND REAR;
- REAR FENCE WITH SAFETY INTERLOCK;
- HIGH SPEED HYDRAULICS;

FORWARD 50″x 10″ TURRET MILL WITH THREE AXIS DRO AND POWER DRAW BAR

April 19, 2010 on 11:40 am | In Milling Machines, Turret, Plain, Horizontal, Production, Universal, Huron-Style | Comments Off

MODEL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4VS-40SW
SERIAL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 02057541
TABLE DIMENSIONS. . . . . . . . . . . . . . . . . . . 50″ X 10″
LONGITUDINAL TRAVEL(APPROX). . . .30″ (POWER)
CROSS TRAVEL (APPROX). . . . . . . . . . . . . .16″ (POWER)
VERTICAL KNEE TRAVEL (APPROX). . .15.5″ (POWER)
SPINDLE TAPER . . . . . . . . . . . . . . . . . . . . . . .# 40 MT
SPINDLE SPEEDS (VARIABLE) . . . . . . . . .70 – 3,800 RPM
QUILL TRAVEL . . . . . . . . . . . . . . . . . . . . . . . .5″
QUILL FEEDS . . . . . . . . . . . . . . . . . . . . . . . . . .0.006″ – 0.003″
SPINDLE DRIVE MOTOR . . . . . . . . . . . . . . .5 HP
ELECTRICS . . . . . . . . . . . . . . . . . . . . . . . . . . . .550/60/3 VOLT
DIMENSIONS . . . . . . . . . . . . . . . . . . . . . . . . . .55″ W X 53″ D X 88″ H
APPROXIMATE WEIGHT . . . . . . . . . . . . . .3,250 LBS
C/W:
- NEWALL MODEL C 80 THREE AXIS DRO UNIT;
- ALIGN POWER FEED UNITS ON LONG., CROSS & KNEE;
- ALIGN AIR OPERATED POWER DRAW BAR;
- TURRET HEAD SWIVELS LEFT/RIGHT/FRONT/BACK;
- COOLANT PUMP;
- ONE SHOT LUBRICATION;
- HARDENED & GOUND WAYS & TABLE SURFACE;

FORWARD 14″x 40″ GEARED HEAD ENGINE LATHE

April 16, 2010 on 9:34 am | In Lathe, Engine, Turret | Comments Off

MODEL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .LD 1440 E
SERIAL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9306185
SWING OVER BED . . . . . . . . . . . . . . . . . . . . . . .14″
SWING IN GAP. . . . . . . . . . . . . . . . . . . . . . . . . . .20-3/8″
SWING OVER CROSS SLIDE . . . . . . . . . . . . . .8-3/4″
CENTRE DISTANCE . . . . . . . . . . . . . . . . . . . . .40″
SPINDLE SPEEDS (9). . . . . . . . . . . . . . . . . . . . .82 – 2,000 RPM
SPINDLE BORE . . . . . . . . . . . . . . . . . . . . . . . . . .1-9/16″
TAILSTOCK TAPER . . . . . . . . . . . . . . . . . . . . .# 3 MT
SPINDLE TAPER. . . . . . . . . . . . . . . . . . . . . . . . .# 5 MT
ELECTRICS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .575/60/3 VOLT
SPINDLE DRIVE MOTOR. . . . . . . . . . . . . . . . .3 HP
DIMENSIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . .68″ L X 27″ W X 49″ H
APPROX. WEIGHT . . . . . . . . . . . . . . . . . . . . . . .1,584 LBS
C/W:
- D1-4 CAMLOCK SPINDLE NOSE;
- INCH/METRIC THREADING;
- 6″ – 3 JAW CHUCK, STEADY REST, FOLLOW REST,
LIVE CENTRE, 1/2″ CHUCK & ARBOR;
- 4 WAY TOOLPOST;
- 1/8 HP COOLANT PUMP; TRAY & REAR SPLASH GUARD;
- RAPID FOOT-OPERATED BRAKE;

STRIPPIT SUPER AG 30/30 SINGLE HEAD PUNCH FABRICATOR

April 16, 2010 on 8:03 am | In Punch - Single Head | Comments Off

MODEL. . . . . . . . . . . . . . . . . . . . . . . . . . .SUPER AG 30/30
SERIAL. . . . . . . . . . . . . . . . . . . . . . . . . . .218122288
THROAT DEPTH . . . . . . . . . . . . . . . . .30″
MAXIMUM HOLE DIAMETER. . . .3-1/2″ DIA. IN 12 GAUGE (MS)
MAXIMUM MATERIAL . . . . . . . . . .1″ DIA. IN 1/4″ (MS)
SHEET SIZE. . . . . . . . . . . . . . . . . . . . . .30″ X 39.37″
GAUGING WITH STOPS. . . . . . . . . .30″ X 39.37″
STROKE LENGTH. . . . . . . . . . . . . . . .0.625″
HITS PER MINUTE. . . . . . . . . . . . . . .80 SPM
MOTOR . . . . . . . . . . . . . . . . . . . . . . . . . .1 HP
ELECTRICS . . . . . . . . . . . . . . . . . . . . . .460/60/3 VOLT
TABLE HEIGHT. . . . . . . . . . . . . . . . . .30″
FLOOR SPACE . . . . . . . . . . . . . . . . . . . .104″ W X 78″ D X 70″ H
WEIGHT . . . . . . . . . . . . . . . . . . . . . . . . .4,900 LBS
C/W:
- CNC TWO AXIS GAUGING CONTROL;
- CNC CONTROL WITH CRT DISPLAY & 128 K STORAGE;
- TOOL RECORD THAT LISTS ALL TOOLS BY SHAPE & SIZE;
- ELECTRIC FOOT PEDAL;
- PUNCH HOLDERS – ALL SIZES;
- TWO CABINETS FULL OF TOOLING;
- IN VERY NICE WORKING CONDITION – CLEAN!

AMADA 110 X 10 FT TON HYDRAULIC CNC PRESS BRAKE – FBD1030F

March 30, 2010 on 12:06 pm | In Company, Press Brake, Brake Press, Hydraulic, Mechanical, CNC | Comments Off

MODEL. . . . . . . . . . . . . . . . . . . . . . . . . . . .FBD 1030 F
SERIAL. . . . . . . . . . . . . . . . . . . . . . . . . . . .1030486
NEW. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1995
BENDING LENGTH. . . . . . . . . . . . . . . .122″
LENGTH OF BED & RAM. . . . . . . . . . .118″
DISTANCE BETWEN HOUSINGS. . .106″
MAXIMUM OPEN HEIGHT . . . . . . . .17″
RAM STROKE . . . . . . . . . . . . . . . . . . . . .3.94″
OPEN HEIGHT. . . . . . . . . . . . . . . . . . . .14.5″
THROAT DEPTH. . . . . . . . . . . . . . . . . .15.75″
APPROACH SPEED . . . . . . . . . . . . . . . .215 IPM
PRESSING SPEED. . . . . . . . . . . . . . . . . .20 IPM
RETURN SPEED . . . . . . . . . . . . . . . . . . .217 IPM
WIDTH OF BED. . . . . . . . . . . . . . . . . . . .3.5″
ELECTRICS . . . . . . . . . . . . . . . . . . . . . . .460/60/3 VOLT
MOTOR . . . . . . . . . . . . . . . . . . . . . . . . . . .10 HP
DIMENSIONS. . . . . . . . . . . . . . . . . . . . . .135″ L X 62″ D X 99″ H
WEIGHT . . . . . . . . . . . . . . . . . . . . . . . . . .15,500 LBS
C/W:
- AMADA NC9-F CNC CONTROL WITH CRT;
- 6 AXIS BACK GAUGE;
- SAFETY LIGHTS;
- DOUBLE ELECTRIC FOOT PEDAL;
- TOP & BOTTOM TOOL HOLDERS;

CME 15″x 75″ UNIVERSAL HORIZ/VERT MILLING MACHINE WITH HURON STYLE HEAD

March 25, 2010 on 12:02 pm | In Milling Machines, Turret, Plain, Horizontal, Production, Universal, Huron-Style | Comments Off

MODEL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .FU 3L CM
SERIAL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3104
TABLE LENGTH. . . . . . . . . . . . . . . . . . . . .75″ X 15″
TABLE TRAVEL – LONG . . . . . . . . . . . . .55″ POWER
– CROSS. . . . . . . . . . . . .14″ POWER
– VERTICAL . . . . . . . .19.7″ POWER
VERT. & HORIZ. SPINDLE TAPERS. . .# 50
VERT. SPINDLE SPEEDS(12) . . . . . . . . .50-2,150 RPM
HORIZ. SPINDLE SPEEDS(18) . . . . . . . .28-1,400 RPM
X & Y FEED RATES(18). . . . . . . . . . . . . . .0.1 – 48.8 INCHES/MIN
VERTICAL FEED RATES . . . . . . . . . . . .0.197 – 17.1 INCHES PER MIN
ELECTRICS. . . . . . . . . . . . . . . . . . . . . . . . .550/60/3 VOLT
TABLE FEED DRIVE MOTOR . . . . . . .5 HP
OVERARM SPINDLE MOTOR . . . . . . .10 HP
HORIZ. SPINDLE DRIVE MOTOR . . .15 HP
DIMENSIONS. . . . . . . . . . . . . . . . . . . . . . .98″ L X 72″ W X 92″ H
APPROX. WEIGHT . . . . . . . . . . . . . . . . . .8,816 LBS
C/W:
- ACCURITE THREE AXIS DRO UNIT;
- PENDANT CONTROLS;
- RAPID FEEDS ALL DIRECTIONS;
- SWIVEL TABLE;
- HURON STYLE VERTICAL HEAD SWIVELS TO ALL ANGLES;
- COOLANT PUMP IN BASE;
- HORIZONTAL ARBORS;